Specifications

Phone [phone] • Fax [phone] • www.motec.com Page 13
Option - Integrated Switch
Assembly
M E816
E816 Contains:
- 16 Analog Voltage Inputs
- 4 Digital Inputs
- 2 Switch Inputs
- 2 ermistor Inputs
- 8 PWM Outputs
M E888
E888 and E816 add additional I/O to your system. ey talk to the Dash over
the CAN bus so only 2 wires must be routed to the dash from either the E888 or
E816. Each device features its own 0v and 5v references to monitor its own sen-
sor inputs.
E888 contains:
- 8 ermocouple inputs
- 8 Analog Voltage inputs
- 4 Digital Inputs
- 2 Switched Inputs
- 2 Cold Junction Compensation Inputs
- 8 PWM Outputs
Expansion Boxes
M MDD-1
Mini Dash Display
e display is a DOT Matrix backlit graphics LCD which allows the MDD to
support a number of different display layouts to suit various applications. e
MDD is small enough to be mounted on the steering wheel or it may be mount-
ed in a more traditional location using 2 sided tape or Velcro. e MDD and its
outputs are fully controllable when the MDD is used in conjunction with the
ADL. When used with an ECU, the MDD features predefined display screens.
A Switched input to the MDD allows the user to toggle through the different
display screens on the MDD.
• Weighs120 gms (1/4 pound)
• Robust aluminum enclosure
• W X L X H = 3.38 X 2.34 X .86 inches
• Max Current Requirement 150mA @14volts
• For use with ADL Dash Logger or with a MoTeC ECU
• Receives data via serial or CAN bus
MoTeC Mini Display Dash