Specifications

Phone [phone] • Fax [phone] • www.motec.com Page 31
Return line fittings
Hose barb-AN line
M 6AN-16MM BULK
Conversion: metric to AN -6 Converts
STD metric regulator ends to AN lines
M 6AN-12MM
M 6AN-14MM
M 6AN-16MM
M 8AN-14MM
Adjuster for Bosch
motorsport regulators
M 4AN-8MM
Regulator Fittings
How big of a Pump do I need?
In basic terms the amount of fuel you require to properly feed your engine depends on how much power you
intend to produce and what rail pressure you wish to run. Typically a gasoline engine will require .5 lbs of fuel
per hour for every 1 horsepower produced. If you have a 1000 horsepower engine and you intend to run 60
PSI of injection rail pressure, you will need a pump capable of delivering 500 lbs/hr at 60 PSI. Remember that
a pump capable of delivering 2000 lbs/hr free flowing is worthless unless it can deliver the proper amount of
flow at the pressure you want to run. Typically increasing pressure decreases a pump’s volume output.
Pump Outlet fittings for 044, 046
M 6AN-12CU
Pump Inlet fittings for 044 (to 18mm)
M 10AN-18CU
M 8AN-18CU
M GFP 044
Bosch fuel pump, 220 lbs/hr
All pump flow values are measured at 5 bar line pressure with a 14vdc supply
Fuel Delivery