Instruction Manual

70 Appendices
17 0V Sensor 0V Analog Volt & Analog Temp
27 0V Sensor 0V Analog Volt & Analog Temp
33 0V Sensor 0V Analog Volt & Analog Temp
40 0V Sensor 0V Analog Volt & Analog Temp
43 0V Sensor 0V Analog Volt & Analog Temp
0V Digital, Switch, Speed
51 0V Sensor 0V Digital, Switch & Speed
56 0V Sensor 0V Digital, Switch & Speed
61 0V Sensor 0V Digital, Switch & Speed
CAN Interface
71 0V 0V CAN
72 8V 8V CAN
73 CANLA CAN-LO A (Note that 73 is internally connected to 75)
74 CANHA CAN-HI A (Note that 74 is internally connected to 76)
75 CANLB CAN-LO B
76 CANHB CAN-HI B
Note that CAN-LO A is connected to CAN-LO B inside the ADL2. Similarly
CAN-HI A is connected to CAN-HI B. The “B” connections are only provided
to simplify wiring.
USB
68 USB-GND USB Ground (Black + Shield)
70 USB-VCC USB Power (Red)
77 USB-DM USB Data Minus (White)
78 USB-DP USB Data Plus (Green)
RS232
67 TX/Telem RS232 Output (Telemetry or General Purpose)
79 RX RS232 Input
Backlight
6 BL Backlight Inverter Input