Manual

MoTeC Operation 49
Configuration files can be updated by choosing the option to automatically
update the configuration file while updating the software (firmware). It can
also be done manually by upgrading the configuration file and sending it to
the Dash Logger:
• On the File menu, click Open
• In the Files of type box select the new version file extension.
The file will be converted to the new version format and saved with the
same file name but with the new version file extension.
Note: The old file is not changed.
• On the Online menu, click Send Configuration to send the
configuration file to the Dash Logger
Upgrading the Dash Logger
Several options are available as upgrades to customise and grow your
system.
The currently enabled options can be listed and new options can be activated
through a password acquired from MoTeC.
To Upgrade the Dash Logger
• On the Online menu, click Enable Dash Options
Password Protection
• On the Online menu, click Set Access Passwords
Several Dash Logger capabilities can be protected from unauthorised access
by using the password protection.
Note: Ensure you keep passwords secure. The unit needs to be returned to
MoTeC for unlocking if the passwords are lost.
Other Online Activities
Many other activities are accessible from the Online menu including the
following:
Reference Lap – to send a reference lap to the Dash Logger used in the
lap gain/loss system.
View – to view:
o saved details e.g. Running Totals
o Device Halt Counts
Communication – to list the current Connections Settings
Miscellaneous