User guide

MoTeC DBW-4 4 Introduction
Abbreviations & Definitions
DBW - Drive By Wire
ECU - Engine Control Unit
O/P - Output
PID - Proportional, Integral, Derivative Controller
PWM - Pulse Width Modulation
TP - Throttle Position One
TP2 - Throttle Position Two
TPD1 - TP One Driver
TPD2 - TP Two Driver
UTC - USB to CAN converter
Measured Value 1 & Measured Value 2
For drive by wire PID applications Measured Value 1 refers to TP & Measured Value 2 refers to TP2.
For generic PID applications Measured Value 1 is the analog input used for PID Controller feedback. The second
analog input is not used by the PID Controller and can be used as a generic analog input.