Datasheet

ManualsBrandsMoteck Electric Corp ManualsAutomationLinear Actuator 150 mm 24 VDC

Product Data Sheet

www.moteck.com

Actuator

LD20

LD20 is a compact actuator with high load

capability which is designed for use in industrial,

homecare and furniture. It’s an ideal solution

for the applications where installation space is

limited, such as window opener or adjustable

car driver seat.

Option

- Positioning signal feedback with Hall effect sensor x 1

- Positioning signal feedback with Hall effect sensor x 2

- Analog positioning feedback with Potentiometer (POT)

- Mounting bracket

Feature

- Main applications: Industrial, homecare, furniture

- Input voltage: 24V DC / 12V DC

- Max. load: 2500N (push / pull)

- Max. speed at no load: 27 mm/sec

- Max. speed at full load: 4.4 mm/sec @ 2500N

- Stroke: 100 ~ 300 mm (Max. 300 mm)

- Max. current: 4.6A @ 12V DC

- Noise level: ≦70dB

- IP Protection level: IP65

- Color: Aluminum grey

- Preset limit switches

- Duty cycle: 25%, max.1 min continuous operation in 4 min.

- Ambient operation temperature: -25°C ~ +65°C

- Certified: CE marking, EMC Directive 2014/30/EU

Summary of content (5 pages)

PAGE 1
Product Data Sheet www.moteck.com Actuator LD20 LD20 is a compact actuator with high load capability which is designed for use in industrial, homecare and furniture. It’s an ideal solution for the applications where installation space is limited, such as window opener or adjustable car driver seat. Feature - Main applications: Industrial, homecare, furniture - Input voltage: 24V DC / 12V DC - Max. load: 2500N (push / pull) - Max. speed at no load: 27 mm/sec - Max. speed at full load: 4.
PAGE 2
Compatibility Model Product LD20 spec T control, CS1, CS2, CB3T, CB4M, CBT2 Without positioning sensor feedback 4-pin MOTECK F type DIN plug CB3T-SY, CB4M-S, CB4M-B Positioning feedback with Hall effect sensor x 2 6-pin MOTECK F type DIN plug Control box Performance Data Gear Ratio Model No. Push / Pull Max. (N) Typical Current (A) Typical Speed (mm/s) No load Full load No load Full load 12V 24V 12V 24V 12V 24V 12V 24V LD20-XX-10-G4-X..... 10:1 500 26.8 27.0 18.6 18.7 1.3 0.
PAGE 3
Dimensions Standard Stroke (S) 100 (4”) 150 (6”) 200 (8”) 250 (10”) 300 (12”) 205 255 305 355 405 Retracted Length (A) 80 34 25 114 45 Ø20 87 Ø10 Ø20 77 Ø10 S A With Potentiometer (POT) Stroke (S) Retracted Length (A) 100 (4”) 150 (6”) 200 (8”) 250 (10”) 300 (12”) 242 292 342 392 442 80 71 25 Ø10 45 Front connector Ø20 Ø20 77 Ø10 87 151 S A Mounting bracket 22 Ø6.5 22 Ø8, Ø10 39.
PAGE 4
Wiring & Cable plug Standard M+ M- Power Red M+ Black M- With Hall effect sensor x 1 M+ MGND VCC Power Red Black M+ M- White GND Signal Yellow VCC White GND Signal Yellow Blue VCC Data 1 Blue Data 1 Data 1 With Hall effect sensor x 2 M+ MGND VCC Data 2 Data 1 Power Red Black M+ M- Model No. LD20-XX-10-G4-XXX-XXXXX LD20-XX-20-G4-XXX-XXXXX LD20-XX-30-G4-XXX-XXXXX LD20-XX-40-G4-XXX-XXXXX LD20-XX-50-G4-XXX-XXXXX Green Data 2 Resolution (pulses/mm) 2.56 4.75 7.16 9.66 11.
PAGE 5
Ordering Key LD20 - 24 - 20 - G4 - 100 - A A D 0 3 Input voltage 24: 24V DC 12: 12V DC Gear ratio 10: 10:1 20: 20:1 30: 30:1 40: 40:1 50: 50:1 Motor and Spindle type G4 (Refer to Performance Data) Stroke 100: 100 mm 150: 150 mm 200: 200 mm 250: 250 mm 300: 300 mm Front connector 1: Ø10 mm 8: Ø8 mm A: Mounting bracket, Ø10 mm (Refer to Dimensions) Rear connector 1: Ø10 mm 8: Ø8 mm A: Mounting bracket, Ø10 mm (Refer to Dimensions) Positioning feedback 0: None S: Hall effect sensor x 1 D: Hall ef