Instruction Manual

6
Mother’s Choice | ava 4 wheel stroller
Step 3: Rear wheel assembly
• IMPORTANT: Please follow the instructions
carefully on this key step to ensure secure
installation of wheels.
• Ensure the axle cover is removed before
continuing.
• Slide the rear wheel onto the axle.
Ensure the brake cogs are facing towards
the axle. (Figure 3a)
• Press the centre button and hold the button
in a lower position. (Figure 3b)
• Push the wheel to the end and then release
the button. (Figure 3b)
• Pull the wheel to check if it is fastened.
(Figure 3c)
• Repeat these steps to attach the other rear
wheel.
Step 2: Installing rear axle/brakes
• Insert the axle assembly into the rear
stroller legs and push up until it snaps
into place (Figure 2).
mother’s choice tip...
Ensure red brake levers face towards the rear of
stroller.
2
insert
ASSEMBLING THE STROLLER
mother’s choice tip...
Release the brak
e pedal so the brake pin does not
conict with the wheel when assembling the rear
wheels.
3a
3b
3c
push
push
pull
pull