User's Manual

Connect to the Moticam X WiFi signal. Please see the following instructions.

Connect to the Moticam X WiFi signal

1. Each Moticam X transmits its own WiFi signal. A further computer is not needed to

view live images of the Moticam X on your WiFi Devices.

2. For best performance, we recommend to use WiFi devices, such as tablets, with a

screen not smaller than 7 inches. For iOS devices we suggest using iOS 5 or higher

while for Android Devices we suggest using Version 4.0 or higher.

3. The Moticam X’s SSID signal name is printed on a label on the camera. To log into

your camera, simply connect your WiFi device to that signal. The password for the

Network by default is 12345678.

4. To operate and use the camera, please download our free App called MotiConnect

for iOS or Android devices.

5. You can also use certain web browsers such as Chrome, Firefox or Safari to view,

measure and capture without the need for the camera.

6. To view the camera stream on your browser, please type in the IP number also

shown on the label on the camera. For example 192.168.1.151. On your browser,

type 192.168.1.151:8080 and you will be connected straight to the camera.

7. The Moticam X can also be used with Motic Images Plus software for Windows

computers. If you have a WiFi enabled laptop, you can install Motic Images Plus

from the CD provided. To view the camera in our product’s MI Devices interface,

simply log your computer onto the Moticam X’s WiFi signal, then open the MI

Devices interface by clicking on the camera icon within Motic Images Plus and

select Moticam X from the drop down menu. Then click on Open.