User's Guide
Table Of Contents
- Contents
- Getting Started
- Features
- Using the system
- Using Motion Dashboard
- Using the pen
- Using Tablet PC Input Panel
- Configuring pen options
- Enabling personalized handwriting recognition
- Using personalized handwriting recognition
- Configuring front panel buttons
- Using the display
- Using the bar code scanner
- Using the RFID reader
- Using the camera
- Using the smart card reader (optional)
- Using the built-in microphones
- Using speech recognition
- Using the battery
- Using power management
- Using Wi-Fi (802.11a/b/g)
- Using Mobile Broadband
- Using Bluetooth
- Using Motion OmniPass and the fingerprint reader
- Using Windows Security Center
- Setting up users and passwords
- Finding additional software
- Care and Maintenance
- Troubleshooting and Support
- Index
60 Chapter 4 Care and Maintenance
Training and documentation considerations
All users of tablet computers in the health care environment should be provided with
training on proper cleaning procedures. Cleaning procedures should be added to the
institution's policies and procedures for infection prevention.
Cleaning solutions
This section describes various cleaning solutions that have been tested by
Motion Computing. Review the manufacturer's guidelines for proper use of the product.
Cleaning the fan cover
If the fan cover becomes soiled, it can be removed and cleaned.
To clean the fan cover
1. Shut down the system, unplug it, and remove the battery.
2. Turn the unit over so that the back side is facing up.
3. Press the fan cover release button.
4. Slide the fan cover away from the unit to remove it.
5. Clean the fan cover according to the guidelines for your organization.
6. After the fan cover is clean and dry, slide it back onto the unit until it snaps into place.
Product Type Manufacturer Comments
Vira-Guard Veridien Concentrated Isopropanol. Does not leave film.
Cavi-Wipes Metrex Isopropanol and Ethylene Glycol Monobutyl
Ether. Leaves a slight film which needs a
secondary wipe with dry cloth to remove.
Sani-Cloth PDI Quaternary Ammonium. Leaves a slight film
which needs a secondary wipe with dry cloth
to remove.
Press