User's Guide

Chapter 2 Using your C5m/F5m Connect an external monitor 34
4. Select the primary or secondary orientation for which you want to change the button
settings from the Button settings for: drop-down list.
5. Select the button combination you want to change. The currently selected buttons
appear in red.
6. Tap Change.
7. Select the appropriate action for the button.
T
IP: You can configure different button settings for different orientations.
N
OTE: To reset the buttons to their default values, tap the Reset button.
Connect an external monitor
To connect an external monitor to the C5m/F5m, you use theC5/F5-Series docking station,
which is sold separately.
To set up an external monitor:
1. Connect the monitor cable from the external monitor into theC5/F5-Series docking
station according to the C5/F5-Series Docking Station User’s Guide.
2. Plug in the external monitor and turn it on.
3. If necessary, install software and drivers for the monitor. See the manufacturer’s
documentation for more information.
Using the built-in microphones
You can use the built-in array microphones to record audio, dictate notes, and use voice
commands. The two microphones are used at the same time to optimize sound detection
for speech recognition and voice recording.
Using the cameras
Your C5m/F5m may include built-in web and documentation cameras.