User's Guide

Chapter 2 Using your C5m/F5m Using Mobile Broadband with GNSS 45
Enabling Mobile Broadband with GNSS
You can purchase a C5m/F5m Tablet PC with an optional embedded mobile broadband
module that enables you to connect to a variety of mobile broadband networks for sending
and receiving data wirelessly. You can typically use mobile broadband anywhere you can
use your mobile phone.
The mobile broadband module includes Global Navigation Satellite System (GNSS) support.
The GNSS receiver uses GPS and GLONASS satellites to determine the current location,
altitude, heading, and horizontal velocity of the C5m/F5m. You don’t need a network
connection or an account with a mobile broadband network carrier to use the GNSS
receiver. You can use it with your preferred mapping applications to find your current and
desired locations.
Before you can establish a Mobile Broadband connection or use the Mobile Broadband
GNSS receiver, you must ensure that Mobile Broadband with GNSS is enabled in Motion
Tablet Center. Open Motion Tablet Center, tap Power and ensure that the switch beside
Mobile Broadband is turned on.
N
OTE: Before you can connect to a mobile broadband network, you must have an active account
with a cellular network provider and obtain a SIM card for mobile broadband access.
Configure Mobile Broadband
To set up Mobile Broadband:
1. Before inserting the SIM card, power the tablet on.
2. Enable mobile broadband:
a. Swipe from the right side of the screen and tap Settings.
b. From the Settings menu, tap the network icon .
c. Slide the mobile broadband On/Off slider to On.
3. Tap (find more) under Mobile Broadband.
a. Select location and tap OK.
4. Select the desired network service provider.
a. Supported North America service providers: Sprint, AT&T, Rogers, Telus, Bell, Verizon
Wireless. For all other service providers, select Generic.
b. Supported International service providers: Vodafone, Telefonica, Orange, Telstra,
Swisscom. For all other service providers, select Generic.
c. If your desired network service provider or Generic isn’t listed, then the Mobile
broadband is already configured for your service provider. Skip to Insert SIM card.
5. Select the Connect automatically checkbox if you want to connect automatically in the
future.