User's Guide

Chapter 2 Using your C5m/F5m Using the smart card reader (optional) 52
3. Follow the on-screen instructions.
4. After you have enabled encryption, reboot your Tablet PC, and manually restart
SecureDoc to complete the encryption process.
For more information about WinMagic SecureDoc, go to http://www.winmagic.com/
products/full-disk-encryption-for-windows.
Using the smart card reader (optional)
Your tablet may include the optional smart card reader located on the back of the tablet
next to the battery. This device uses smart card software to read information from the smart
card when the card is inserted into the reader.
The smart card is an ISO 7816 PC/SC compliant, contact type smart card reader/writer.
Depending on the smart card software you’re using:
• You may receive an acknowledgement when the smart card is fully engaged in the
reader.
• You may receive a prompt or be required to shut down the software before removing the
smart card.
• Some smart cards may require you to insert the smart card for authentication and then
remove the smart card when authentication is completed.
• Some smart cards may require keeping the card in the reader while the smart card
software is running.
To insert the smart card:
1. Place the smart card in front of the smart card reader opening with the metal contacts of
the embedded chip facing the back of the tablet.