User's Manual
Table Of Contents
- Contents
- Getting Started
- Features
- Using the system
- Using Motion Dashboard
- Using the pen
- Using Tablet PC Input Panel
- Configuring pen options
- Enabling personalized handwriting recognition
- Using personalized handwriting recognition
- Configuring front panel buttons
- Using the display
- Using the bar code scanner
- Using the RFID reader
- Using the camera
- Using the smart card reader (optional)
- Using the built-in microphones
- Using speech recognition
- Using the battery
- Using power management
- Using Wi-Fi (802.11a/b/g)
- Using Mobile Broadband
- Using Bluetooth
- Using Motion OmniPass and the fingerprint reader
- Using Windows Security Center
- Setting up users and passwords
- Finding additional software
- Care and Maintenance
- Troubleshooting and Support
- Index
![](/manual/motion-computing/gu3k2722/user-s-manual-english/images/img-27.png)
44 Chapter 3 Using the system
2. Locate the SIM slot door and open it.
Note: The SIM slot and a diagnostic port are behind the SIM slot door. The SIM slot is
below the diagnostic port.
3. Place the SIM card label side down on the battery tray. Ensure that the notch on the SIM
card is in the upper right corner.
4. Slide the SIM card into the SIM card slot until it clicks into place. You may need to use a
paper clip to push the SIM card all the way in.
To remove a SIM card
1. Turn off the system and remove the battery (page 36).
2. Open the SIM slot door.
3. Press the card in slightly until it pops out. You may need to use a paper clip to push the
SIM card in to release it.
SIM slot
Diagnostic port