Instruction Manual

Motion Computing LE-Series and LS-Series Tablet PCs User Guide 85
The system doesn’t recognize
a USB device.
Windows XP may take a short
time to recognize the device.
Wait until Windows XP
recognizes the device.
The accessory isn’t connected
to the Tablet PC correctly.
Check the connection cable
and be sure it is inserted into
the correct port on the Tablet
PC and the accessory device.
The correct driver isn’t built into
Windows XP.
Use the device’s installation
CD or check the
manufacturer’s website for the
correct driver.
The Tablet PC is sitting in the
Motion FlexDock for the LE-
Series, or the Motion
MobileDock for the LS Series
but the system doesn’t
recognize any accessory
devices, such as the external
monitor or DVD/CD RW.
The Tablet PC isn’t fully
seated.
Reseat the Tablet PC in the
Motion FlexDock for the LE-
Series, or the Motion
MobileDock for the LS Series.
AUDIO
No sound is coming from the
built-in speakers.
Connecting a headset or
external speakers mutes the
built-in speakers.
Disconnect the headset or
external speakers if not in use.
No sound is coming from any
speakers.
Audio volume is too low or has
been muted.
Open the Motion Dashboard,
Audio panel, and adjust the
speaker volume by sliding the
volume slider or uncheck the
Mute button.
I’ve forgotten my BIOS
password and can’t access my
system.
The Tablet PC will let you enter
several passwords incorrectly
before it temporarily locks the
system.
Turn the Tablet PC off and
back on and try re-entering
your password (you can do this
as many times as needed). If
you have forgotten your
password, contact Motion
Computing Technical Support
for information about unlocking
your system at
www.motioncomputing.com/
support.
The program I’m working in
has stopped responding, but
the cursor moves and other
programs work.
The program has crashed. Press the SAS (Ctrl+Alt+_Del)
button (small button with a key
icon) on the Tablet PC front
panel to open the Task
Manager and end the non-
responsive program.