Getting Started Guide

Step 3. Set up Mobile Broadband with GPS (optional)
If you purchased your R12 with the optional mobile broad-
band module, you can connect to high-speed cellular net-
works worldwide. With the mobile broadband module and a
data plan from one of several cellular network providers, you
have full Internet access.
NoTe Before you can connect to a mobile broadband
network, you must have an active account
with a cellular network provider and obtain
a SIM card for mobile broadband access.
1. With the Tablet PC powered off, insert the SIM card
and then power the tablet on.
2. Enable mobile broadband:
a. From the Charms menu, tap Settings.
b. From the Settings menu, tap the wireless network
icon .
c. Slide the mobile broadband On/Off slider to On.
3. If the desired network service provider isn’t displayed,
tap (nd more) under Mobile Broadband.
a. Select location and tap OK.
4. Select the desired network service provider.
5. Follow the on-screen instructions.
NoTe If you purchased your R12 with the optional
Mobile broadband with GPS module or
the optional discrete GPS module, your
R12 has GPS capabilities. You can use GPS
with your preferred mapping application to
nd your current and destination locations.
Please refer to the User’s Guide for additional
information.
5
R12 Getting Started
Model R001
Set up wireless
The R12 includes built-in Wi-Fi® and Bluetooth®.
Your Tablet PC may also be equipped with mobile
broadband. To set up available wireless networks, follow
these steps:
Step 1. Set up Wi-Fi
1. Enable Wi-Fi:
a. From the Charms menu, tap Settings.
b. From the Settings menu, tap the wireless network
icon .
c. Slide the Wi-Fi On/Off slider to On.
2. Select a wireless network from the list of available
networks.
3. Follow the on-screen instructions.
Step 2. Set up Bluetooth
1. Enable Bluetooth:
a. From the Charms menu, tap Settings.
b. From the Settings menu, tap Change PC Settings.
c. Under PC and Devices, tap Bluetooth.
d. Slide the Bluetooth On/Off slider to On and the
Tablet PC will begin to search for Bluetooth devices.
2. To add a Bluetooth device:
a. Ensure that the Bluetooth device is discoverable
according to the manufacturer’s instructions. (When
a Bluetooth device is discoverable, it’s visible to
other Bluetooth devices within range.)
b. Select the desired Bluetooth device from the list of
devices.
c. Follow the on-screen instructions.