Getting Started Guide

ManualsBrandsMotion Computing ManualseBook ReaderMotion Computing R12

R12 Getting Started

Model R001

Tips

Make the most of your R12 by following these tips.

Pen and Touch tips

• You can change from right- to left-handed use. From

Motion Tablet Center, tap Tablet PC Settings, tap the

Other tab, then tap Left-handed.

• You can open items with one tap (instead of two) and

select an item by pointing to it. From the Control Panel,

tap Folder Options, then tap Single-click to open an

item (point to select).

Battery tips

• Use AC power when available. When the R12 is plugged

in, the battery charges while in use.

• Put your Tablet PC in Sleep mode when you’re not using it.

• Stop unnecessary background applications and processes.

• When not in use, disable wireless adapters using the

Motion Tablet Center Power category.

• Set the brightness of the display to automatically dim

after a selected number of minutes of inactivity using the

Motion Tablet Center Power category. Tap Power, tap

Advanced, then tap Choose when to turn off the

display.

• When using mobile broadband, reduce how often the R12

updates email and other Internet applications to once

every half hour or longer.

• Disable mobile broadband where you know a signal is

unavailable.

• Condition your battery once a month. To condition it, run

the Tablet PC on battery power until the battery’s charge

level drops below 20%.

• For long-term storage, ensure that the battery’s charge

level is between 20% and 40% before removing it from

the Tablet PC.

General tips

• Use only the R12 digitizer pen or your nger on the

display. The Tablet PC doesn’t respond to any other

type of pen or stylus.

• When attaching the pen tether, slip one end of the tether

through the hole at the end of the pen and pull the pen

through the loop until it’s tight. Then slip the other end

of the tether through the attach point and pull the pen

through the loop until it’s tight.

• Store the pen in the pen holder when not in use. To store

the pen, insert it into the pen holder and press until you

hear a click. To remove the pen, press it until it pops out. If

the tether is attached, press the pen before pulling it out

to ensure that you don’t pull it out by the tether.

• Clean ngerprints and smudges from the display surface

by wiping it with the display cloth provided. If needed,

use a cleaning solution recommended by Motion

Computing to clean the display. Spray the solution on the

cloth then wipe the display. See the recommended list of

tested solutions on our website.

• You can nd the serial number of the R12 in the battery

bay.

Learn more

To get more detailed information about your Tablet PC,

please see the R12 User’s Guide available on the User

Documentation page on our website. You can also nd the

following information on our website:

• Motion Support

• Motion Knowledge Base

• Free online training videos

• R12 accessories

• Software for the R12 Tablet PC

Motion Computing and Motion are registered trademarks of Motion Computing, Inc. in the United States and other countries. All other trademarks are properties of

their respective owners. Microsoft, Windows, and Windows Journal are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other