User`s guide

Chapter 2 Using your CL900 Using touch 19
6. To adjust the speed and duration of the Press and hold action, under Pen action, tap
Press and hold then select Settings. Move the slider to make your adjustments.
7. To enable the function button on the pen, select Use the pen button as a right-click
equivalent.
N
OTE: Pen & Input Devices contains the Use the top of the pen to erase ink option, which is not
available on the pen. Instead, you can set the pen’s function button to act as an eraser.
To use the pen function button as an eraser
1. Tap Pen & Tablet.
2. Tap Touch Settings.
3. Tap the Pen tab.
4. Under Pen button, select Eraser.
Adjusting tablet PC settings
From Tablet PC Settings, you can change from right-handed to left-handed use.
To change handedness
1. Open Motion Dashboard.
2. Tap Pen & Tablet.
3. Tap Tablet PC Settings.
4. Select the Other tab and make your desired change.
The Tablet PC Settings Display tab has a Calibrate option. This does not apply to the
CL900. Instead, if touch input does not behave as expected, you can tune touch as
described in “Using the touch tuning option” on page 17.
The Configure your pen and touch displays option on the Tablet PC Settings Display
tab is useful for assigning touch to the appropriate display when one or more displays are
connected to the tablet. By default, Windows 7 assumes that an external display is for touch
input. To change this, run Setup from Tablet PC Settings to assign touch to your tablet
display. If you have multiple external monitors, run Setup to assign touch to the correct
display.
N
OTE: A keyboard must be connected to the tablet to perform this procedure.
To assign touch to the desired display
1. Open Motion Dashboard.
2. Tap Pen & Tablet.
3. Tap Tablet PC Settings.
4. Select the Display tab.
5. Tap Setup next to “Configure your pen and touch displays.”