Datasheet

ManualsBrandsMotionKing ManualsAutomationMicrostepping Resolution Driver

User’s Manual

2L415B

High Performance-Cost ratio 2-phase Microstepping Driver

VER 2.0

Appreciate your selection of MotionKing

driver. To make full use of its versatile

performance, please read this manual carefully before using the driver!

MotionKing(China) Motor Industry Co., Ltd.

T: (86)519-8988 6261 F: (86)519-8515 1172

Web site: www.MotionKing.com E-Mail: sales@MotionKing.com

The content in this manual has been carefully prepared and is believed to be accurate, but no

responsibility is assumed for inaccuracies.

MotionKing reserves the right to revise the manual without prior notice for reliability,

function and design improvement. MotionKing does not assume any liability arising out of

the application or use of any product or circuit described herein; neither does it convey any

license under its patent rights of others.

MotionKing’s general policy does not recommend the use of its products in life support or

aircraft applications wherein a failure or malfunction of the product may directly threaten

life or injury. According to MotionKing’s sales terms, the user of MotionKing products in

life support or aircraft applications assumes all risks of such use and indemnifies

MotionKing against all damages.

Summary of content (5 pages)

PAGE 1
User’s Manual The content in this manual has been carefully prepared and is believed to be accurate, but no 2L415B High Performance-Cost ratio 2-phase Microstepping Driver VER 2.0 Appreciate your selection of MotionKingTM driver. To make full use of its versatile performance, please read this manual carefully before using the driver! MotionKing(China) Motor Industry Co., Ltd. T: (86)519-8988 6261 F: (86)519-8515 1172 Web site: www.MotionKing.com E-Mail: sales@MotionKing.
PAGE 2
L415B Microstepping Driver VER 2.0 2L415B Microstepping Driver VER 2.0 Contents 2L415B Microstepping Resolution Driver 1. General Introduction 1. General Introduction ····························································································· 3 2L415B is a high performance microstepping resolution driver that incorporates the most advanced technology in the world. It is suitable for driving any 2-phase and 4-phase hybrid step motors under 1.5A current.
PAGE 3
2L415B Microstepping Driver VER 2.0 4. Definition of Pin Signal 2L415B Microstepping Driver VER 2.0 Connector P2 Configurations Connector P1 Configurations Pin Function Details Pin Function Gnd DC power ground Details DC +V Pulse signal: This input represents pulse signal, effective for each PUL power supply, 15~40VDC, Including voltage fluctuation and EMF voltage. rising edge; 4-5V when PUL-HIGH, 0-0.5V when PUL-LOW.
PAGE 4
2L415B Microstepping Driver VER 2.0 7. Mechanical Dimensions 2L415B Microstepping Driver VER 2.0 9. Selection Microstep resolution and driver current This driver uses a 6-bit DIP switch to set microstep resolution, dynamic current and standstill current, details as below: Microstep Resolution Selection Microstep resolution is set by SW4, SW 5, SW 6 of the DIP switch as shown in the following table: Steps/rev.(for1.
PAGE 5
2L415B Microstepping Driver VER 2.0 10. Connection of Motor 2L415B Microstepping Driver VER 2.0 1. Supply voltage setup: Generally speaking, when the motor runs at high speed, higher voltage makes higher torque 2L415B driver can drive any 2 phrase / 4 phrase motor with 4, 6 or 8 lines under 1.5A current. Phrase A of the stepping motor connected between 3 and 4 pins of P2, phrase B connected between 5 and 6 pins of P2. The detailed connection of 4, 6, 8 lines stepping so avoid step-lost.