Service manual

2.. Digital Speedometer
1.Symbol description
••speed indication
••high beam indicator
••signal lamp ind icator
••reverse gear indicator
••parking indicator
••RESET button
••MODE button
••••••••••••••
2.Setting: Press “MODE + RESET”2 sec., then can get into the setting procedure.
••Unit: km/h or mile/h, switched byMODE, and RESET to confirm.
••Wheel circumstance: from 1 to 3999 mm, 4 digitals individually set by RESET to increase one by one, and
MODE
to next digital. Finally pressMODE2 sec. to escape setting.
••If without pressing any button during20 sec., it will escape to main menu automatically.
••Button operation
Situation
Button
Setting Main menu
MODE : to next parameter
2: escape
: switch display
RESET : digital + 1
2: no function
: no function
2: Reset RT, MAX, TRIP
MODE + RESET 2: setting parameter
••••means press button one time.
ò ••2••means press button and hold 2 seconds.
••Display description: switched by MODE in main menu.
ò Sequence: SPD/TRIP MAX/ODO SP D/RT SPD/TRIP
ò SPD: real time speed
ò TRIP: trip distance from last RESET, press RESET to zero again.
ò ODO: accumulated distance from this speedometer been used.
ò MAX: maximum speed, press RESET to zero again.
ò RT: operating time from last RESET, press RESET to zero again.
••
•
•
•••••••••••••••••••
•
•
•
•
•