Service manual

1.2 TORQUE VALUE
1. Engine:
NO Locking location Q’TY Thread dia. (mm) Lockingtorque (kg-m) Remark
1 Cylinder head bolt A (intake ) 2 6 0.9~1.1
2 Cylinder head bolt B (Exhaust) 2 8 2.2
3 Cap,oil filter graze 1 30 1.5~2.0
4 Flange nut, cam shaft base 4 8 2.2
5 Fixing nut, air valve adjustment 2 5 0.7
Greasing on thread
6 Guiding pin bolt, inner chain adjustment 1 6 0.9~1.1
7 Oil bolt 1 8 1.7~2.0
8 Fixing nut, clutch outer 1 12 5.0~6.0
9 Nut, driven plate 1 12 5.0~6.0
10 Nut, driving plate 1 12 5.0~6.0
11 Spark plug 1 10 1.2~1.3
12 Nut, drive clutch 1 22 9.0~10.0 Left thread
13 Screw, inner chain adjuster 1 6 0.4~0.6
2.General parts please refer the following table:
NO Item Torque (kgf-m)
1 5mm bolt and nut 0.45-0.6
2 6mm bolt and nut 0.8-1.2
3 8mm bolt and nut 1.8-2.5
4 10mm bolt and nut 3.4-4.0
5 12mm bolt and nut 5.0-6.0
6 5mm screw 0.35-0.5
7 6mm screw 0.7-1.1
8 6mm flange bolt and screw 1.0-1.4
9 7mm flange bolt and screw 1.0-1.4
10 8mm flange bolt and screw 2.0-3.0
11 10mm flange bolt and screw 3.0-4.0