Service manual

Information Summary and Preparation 1
24
1) PCODE List
No. PCODE UAES Description
1 P0107 Inlet pressure sensor to GND short-circuited
Manifold Abs.Pressure or Bar.Pressure Low
Input
2 P0108
Inlet pressure sensor to power supply
short-circuited
Manifold Abs.Pressure or Bar.Pressure High
Input
3 P0112
Low voltage of the signal for the air inlet temperature
sensor
Intake Air Temp.Circ. Low Input
4 P0113
High voltage of the signal for the air inlet
temperature sensor
Intake Air Temp.Circ. High Input
5 P0117 Low voltage of the engine temperature sensor Engine Coolant Temp.Circ. Low Input
6 P0118 High voltage of the engine temperature sensor Engine Coolant Temp.Circ. High Input
7 P0122
Voltage of the air throttle sensor less than the lower
limit
Throttle Pos.Sensor Circ. Low Input
8 P0123
Voltage of the air throttle sensor greater than the
higher limit
Throttle Pos.Sensor Circ. High Input
9 P0130 Signal of the oxygen sensor irrational O2 Sensor Circ. Malfunction
10 P0131 Low voltage of the signal for the oxygen sensor O2 Sensor Circ. Low Voltage
11 P0132 High voltage of the signal for the oxygen sensor O2 Sensor Circ. High Voltage
12 P0134 Signal of the oxygen sensor wrong O2 Sensor Circ. No Activity Detected
13 P0201 Nozzle control circuits opened Cylinder 1- Injector Circuit
14 P0261 Nozzle control circuits to GND short-circuited Cylinder 1- Injector Circuit Low
15 P0262
Nozzle control circuits to power supply
short-circuited
Cylinder 1- Injector Circuit High
16 P0321 Reference mark of the RPM signal wrong Engine Speed Reference Mark
17 P0322
No pulse signal of the RMP sensor (Open or short
circuit)
Eng.Speed Inp.Circ. No Signal
18 P0508
Idle speed actuator (ISA) drive to GND
short-circuited
ISA control Circuit Low
19 P0509
Idle speed actuator (ISA) drive to power supply
short-circuited
ISA control Circuit High
20 P0511 ISA pin open ISA control Circuit/Open
21 P0560 Battery voltage signal irrational System Voltage Malfunction
22 P0562 System battery voltage too low System Voltage Low Voltage
23 P0563 System battery voltage too high System Voltage High Voltage
24 P0650 MIL drive circuits wrong Malfunction Indicator Lamp Control Circ.
2) Refer to the circuit diagrams for any troubleshooting or maintenance.