Service manual

Check & Adjustment 3
31
1) Gear oil
Vo l u m e
Total oil volume: 110c.c.
Oil volume replaced: 90c.c.
Service cycle: Every 3000km
Check the oil level
1. Place a graduated cup under the drain plug bolt prior to removal of the bolt.
2. Check the oil volume after the gear oil is evacuated.
Oil replaced
1. Place a vessel under the drain plug bolt; remove and clean the bolt.
2. Install the bolt with the gear oil evacuated.
3. Open the filling orifice and pour new gear oil; tighten a filling orifice bolt.
Torque: 1.2~1.8(kg-m)
△Note: To avoid oil leakage, please check the aluminum gasket attached to the drain plug bolt and the O-ring
attached to the filling orifice bolt for any deformation.
2) Engine oil filter
Function: Filter any impurities or iron filings in engine oil to
avoid the engine worn.
Service cycle: Every 6000 km.
 It is recommended that the O-ring shall be replaced
with the gear oil filter changed.
Filling orifice bolt
Drain plug bolt
 Park the motorcycle on a horizontal surface
for check.