Service manual

Check & Adjustment 3
37
Change of a front brake pad
Tool to change a brake pad:
1. Allen wrench
2. 12” T-type wrench
Check a brake pad’s thickness:
Lowest acceptable thickness of a front brake pad
>4.0mm (with the base’s thickness)
Change a brake lining:
1.
Use an Allen wrench to loose two pins fixing a brake
shoe.
2.
Use a 12” T-type wrench to remove two set screws and
then the brake calipers.
3.
Use a slotted screwdriver to push back the piston with
the brake calipers removed.
Pins fixing a
brake shoe
Set screws fixing
calipers
1
Pin fixing a
brake shoe