Service manual

Disassembly of the Engine Assembly 5
48
4. Disassemble the engine’s throttle cable and vacuum tube
5. Disconnect high-pressure fuel hose connector
7.拆下下懸吊
6. Drain cooling water
7. Disconnect the cooling tube
Disassemble the
throttle cable.
Drain cooling water by removing
the drain plug bolt.
Use a tool to remove
the clamp.
Disconnect the
high-pressure fuel hose.
Note: Release the
pressure first prior to
disconnection of the
high-pressure fuel hose.
Disconnect all vacuum
hoses connected the
engine manifolds and
the air filter.
Disconnect the
upper cooling
tube.
Disconnect the lower
cooling tube.