Service manual

Crankcase & Crankshaft

 Right crankcase cover

A. Remove 3 set screws on the water pump cover and

take out parts such as water pump cover, gasket,

and dowel pin.

Torque=0.9~1.1kg-m

B. Remove 7 set screws on the right crankcase cover

and take out the right crankcase cover, gaskets and

dowel pins.

 Magnetic motor assembly and starting

clutch assembly

A. Remove the starting reduction gear and the starting

reduction gear shaft.

B. Remove 1 set nut of the flywheel and the starting

clutch; take out the flywheel and the starting clutch

with a flywheel puller.

Set screws

Starting reduction gear

Starting reduction gear shaft

Flywheel

Starting clutch &

gear assembly

Set screws

Water pump cover

gasket

Dowel pins