Service manual

Crankcase & Crankshaft 9
63
3. Securely fix the right crankcase with the puller hammer installed for the bearing pulled out.
 Evaluation and measurement of a removed crankshaft
1. Check the connecting rod for any noise attributed to large radial and axial clearances of a running
crankshaft. Replace the useless crankshaft assembly with a new one if necessary.
2. Check the bearing for any noise attributed to large radial and axial clearances of a running bearing.
Replace the useless bearing (or crankshaft assembly) with a new one if necessary.
Check axial and radial
clearances
Check a bearing