Specifications

(2) Battery: Recharge when run out of it
1.Remove the floor mat.
2.Screwing out the two screws on the battery cover; remove the battery cover.
3.Remove the negative cable and then the positive cable, take out the battery to recharge.
4.Re-assembling the battery as the opposite procedure of disassembling after recharging.
Note:
A. Do not take out the sealed bolt when recharging.
B. Without refilling water for the battery.
Please recharging (12V) as the following current.
Time standard: 0.3A*5~10Hr or Rapid: 3A*1Hr