Specifications

(8) Ignition Timing
1.Remove the checking hole cover of ignition timing.
2.Using the ignition timing light to assure the ignition
timing is correct.
3.Under idling, it means in good function when
crankcase’s mark matches to the “F” on the flywheel.
4.Raise the engine revolution to 5000 rpm slowly, it means
in good function, if the crankcase's mark matches with
Entering point of the flywheel.
Note: It is no need to adjust ignition timing and CDI set.
When ignition timing is not correct, just check the
ignition system.