Specifications

5.Disassembling and assembling the front brake-disk.
a. Remove the front wheel.
b. Remove three nuts on the disk.
c. Remove the disk.
d. Assemble the disk follows the disassembling procedure.
Locking torque M8: 2.0~3.0kgm
6.Checking the front brake-disk.
Standard thickness of disk: 3.6mm
Limit of usage: change it when below 3.1mm
7.Checking the front brake-lining.
a.standard thickness: 4.0mm.
limit of use: As the thickness is below 2.0mm, change it.
Note: No grease on the lining.