Specifications

(2) TORQUE VALUE
1. Engine:
No
Locking location
Thread
Dia (mm)
Locking
torque kg-m
Remarks
1 Cylinder head 7 1.0~1.4 When the engine is cold
2 Flywheel outer 10 3.2~4.0
3 Rear brake lever 6 1.0~1.2
4 Driving pulley 10 3.2~4.0
5 Clutch outer 10 3.5~4.0
6 Right crankcase 6 1.0~1.2
7 Drive gear box cover 6 1.0~1.2
8 Left crankcase 6 1.0~1.2
9 Draining and filler bolt 8 1.8 When the engine is cold
10 Inlet pipe 6 1.0~1.2
11 Flywheel magneto stator 6 1.0~1.2
12 Cooling fan 6 1.0~1.2
13 Muffler nut on cylinder head 6 1.0~1.2 When the engine is cold
14 Starting motor 6 1.0~1.4 When the engine is cold
15 Bracket between eng. and
Rubber pad of central stand
6 1.0~1.2
16 Spark plug 14 2.5~3.0
17 Fan cover 6 1.0~1.2
18 Fixed plate, drive clutch 6 1.0~1.4
19 Nut of rear wheel axle 14 11~13 U TYPE NUT
20 Kick starter 6 1.0~1.2
2. Chassis:
NO Locking location Q’TY Thread dia. (mm) Locking torque (kg-m) Remark
1 Locking nut, steering stem 1 10 4.5
2 Front axle nut 1 12 4.5 ~ 5.5 U type nut
3 Rear axle nut 1 16 11~ 13 U type nut
4 Rear shock absorber bolt(upper) 1 10 4.0
5 Rear shock absorber bolt(lower) 1 8 2.4 ~ 3.0
6 Front brake caliper bolt 2 8 2.0 ~ 3.0
7 Chassis bolt, engine hanger bracket 2 10 3.5 ~ 4.5
8 Engine bolt, engine hanger bracket 1 10 3.0 ~ 4.0
9 Brake hose bolt 2 10 3.0 ~ 3.5
10 Air release valve 1 6 0.6
11 Front drum brake arm bolt 1 6 1.0
12 Rear drum brake arm bolt 1 6 1.0