Specifications

•
Check that the oil in the left cylinder
chain tensioner has been drained off
by compressing it. If the operation is
difficult, use a pin drive to push the
central hole so that the oil is drained off
from the circuit.
•
Fit the chain tensioner in the cylinder.
•
Lubricate the piston and the cylinder.
•
Lock connecting rod motion with the fork tool.
•
Using the suitable piston ring clamp tool, place the cylinder and fit the chain in the timing
system plate.
CAUTION
DURING THIS OPERATION, PAY ATTENTION NOT TO DAMAGE THE PISTON.
Specific tooling
020674Y Piston ring clamp
020716Y Connecting rod locking
•
Fit the movable chain slider.
•
Fit the upper gear.
•
Fit the chain tensioner cap temporarily
and keep the chain taut on the service
shaft.
Engine Norge GT 8v
ENG - 210
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten