Specifications

NOTE
FOR EASY DRAINAGE OF THE OIL INSIDE THE PUMPING
MEMBER ROD, PRESS THE STEM IN THE WHEEL HOLD-
ER SLEEVE TO PUMP OIL OUT.
• Carefully check each part of the stem and make sure that there are no damaged elements.
• If there are no damaged or worn elements, refill the stem; otherwise, replace the damaged elements.
Disassembling the fork
•
Drain out all the oil in the stem.
•
Block the wheel holder sleeve with a
vice.
•
Unscrew the bottom screw and remove
it together with its gasket.
•
Remove the dust scraper using a
screwdriver as a lever.
CAUTION
BE CAREFUL NOT TO DAMAGE THE SLEEVE RIM AND
THE DUST SCRAPER.
Norge GT 8v Suspensions
SUSP - 259
Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten