Installation Guide

Assemble center piece for ceiling with
spring buttons
Assemble corners to ceiling structure with
spring buttons
Assemble center piece for ceiling with
spring buttons
Assemble sides connecting to center piece
with spring buttons
Pull canopy over ceiling and fasten corners
with elastic straps
Note: Follow this position (rib-triangle faces inwards).
Note: Place cover over frame while the unit is low
to the ground, secure corners with elastic ball straps,
(see inside corner detail). You will tighten and secure
cover completely after the legs are attached and the
eaves are at arm level.
Note: Tilt the canopy on edge to set up all legs on one side,
then the other.
2 per corner