Datasheet

www.symcom.com • 800-843-8848 • fax: [phone]
33
Available Models:
Features:
• Low voltage protection
• Diagnostic LED
• 8-pin plug in; DIN rail or surface mount
A pprovals:
201-100-SP
201-200-SP
201-200-SP-T-9
Specications
The Model 201-xxx-SP
is an 8-pin octal-base, plug-in voltage monitor
designed to protect single-phase motors regardless
of size. The 201-100-SP is used on 95-120VAC,
50/60Hz motors to prevent damage caused by
low voltage. The Model 201-200-SP is used on 190-
240VAC, 50/60Hz motors. The 201-200-SP-T-9 is
a pin-for-pin replacement for a Time Mark
®
#260
Series voltage monitor. High voltage protection is
included in the 201-200-SP-T-9.
The unique microcontroller-based voltage and
voltage-sensing circuit constantly monitors the
voltage to detect harmful power line conditions.
When a harmful condition is detected, the
MotorSaver’s output relay is deactivated after a
specified trip delay. The output relay reactivates
after power line conditions return to an acceptable
level and a specified amount of time has elapsed
(restart delay). The trip delay prevents nuisance
tripping due to rapidly fluctuating power line
conditions.
For more information see:
See Appendix A, page 68, Figure 8 for dimensional
drawing.
See Appendix B, page 76, Figure 29 for typical
wiring diagrams.
Auxiliary Products:
• 8-pin octal socket (P/N: CT0T08-PC)
Model 201-xxx-SP
single-phase voltage/phase monitor, 8-pin socket mount
Single-Phase Voltage Monitor
General Characteristics
Ambient Temperature Range
Operating ......................................-40° to 70°C (-40° to 158°F)
Storage ........................................-40° to 80°C (-40° to 176°F)
Maximum Input Power .........................5 W
Transient Protection (Internal) ...................2500V for 10 ms
Safety Marks
UL (OT08-PC octal socket required) ...............UL508 (File #E68520)
CE ............................................IEC 60947-6-2
Dimensions ....................................1.750” H x 2.375” W x 4.125” D (with socket)
(44.45 x 60.325 x 104.775mm)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.8 lb. (12.8 oz., 362.87 g)
Mounting Method ..............................DIN rail or surface mount (plug in to
OT08-PC socket)
Socket Available ...............................Model OT08-PC (UL Rating 600V)
The 600V socket can be surface mounted or installed on DIN Rail.
Input Characteristics
Line Voltage
201-100-SP .....................................95-120VAC
201-200-SP, 201-200-SP-T-9 .......................190-240VAC
Frequency .....................................50/60Hz
Functional Characteristics
Low Voltage (% of setpoint)
Trip ..........................................90%
Reset .........................................93%
For 201-200-SP-T-9 only: High Voltage (% of setpoint)
Trip ..........................................110%
Reset .........................................107%
Trip Delay Time
High/Low Voltage Fault ........................4 seconds
Restart Delay Time
After a Fault ...................................2 seconds
After a Complete Power Loss ....................2 seconds
Output Characteristics
Output Contact Rating (SPDT)
Pilot Duty .....................................480VA @ 240VAC
General Purpose ................................10A @ 240VAC
Must use Model OT08-PC or RB08-PC socket
for UL Rating!
Note: Manufacturer’s recommended screw
terminal torque for the RB Series and
OT Series Octal Sockets is 12 in.-lbs.
Pin-out 1
(201-xxx-SP)
(view of socket)
Pin-out 2
(201-200-SP-T-9)
(view of socket)
CATALOG_SYMCOM_2014.indd 33 6/10/14 11:06 AM