User Manual

4A 4B
24V
ENEN
02. CONNECTIONS SCHEME
CONNECTION TO A MOTORLINE CONTROL BOARD
NO Contact NO
COM Common
NC Contact NC
IN- Common input
IN Input (12/24Vdc)
-V Power Supply input
MCONNECT BRIDGE
GRAPHIC DESCRIPTION
MAGNETIC CONTACT CONNECTION
03. CONTROL BOARD
MCONNECT BRIDGE was developed to connect mobile devices (smartphone) and all Motorline
automatisms in a home.
Advantages of using MCONNECT:
• Control anywhere with multiple devices, as long as they are compatible with Motorline remote controls
(Rolling Code and Fixed Code);
• Wireless radio communication up to 15 different devices, each with up to 4 buttons;
• Input for checking the device status (open or closed) using an external sensor (example: magnetic
contact);
• Relay output to connect directly by wires to any type of device;
• Setting up routines for devices, such as opening the gate at 9:00 am and closing the gate at 5:00 pm;
• Synchronization with virtual assistant (Alexa and Google Assistant);
• Power via Micro USB cable or transformer (with wire).
LEDs
• Flash in purple Pairing mode (It is waiting to be added)
• Red No network
• Flash in red Lost connection to the cloud
• Blue
Successfully connected to the local network, but not yet connected
to the cloud
• Flash in blue Upgrading Firmware
• Green Connected to the cloud
Contact
magnetic
12-24V
External
devices
output
Closed position feedback signal
+
Opening contact
-
Note
• If the device is connected with USB, to
use the input, use an external 12/24V source.
Note • If the device is connected with USB, to
use the input, use an external 12/24V source.
The voice assistant (Google Assistant and Alexa) only controls BRIDGE commands if a
scenario for that command is created.