User Manual

5A 5B
85mm
31mm
116mm
75mm
26mm
ENEN
TECHNICAL SPECIFICATIONS
03. CONTROL BOARD
1 • Connect antennas in accordance with:
WF: WiFI
RF: radio frequency
2 • Fix the MCONNECT Bridge to the wall.
Note
• Use the fixing template shipped with the product.
04. INSTALLATION
DEVICE FIXATION
• Power Supply 12/24V ac/dc or Micro USB
• Output relay power 30Vdc 1A
• Input 12/24Vdc
• RF communication distance 100m open field
• Wi-Fi range 50m open field
• Type of relay contact Tension free
05. CONFIGURATION
ADD MODULE IN IN THE APP
1 • Open MCONNECT app.
2 • Login.
3 • On the home page press the "+" button at the top right.
4 • Press Add new MCONNECT.
5 • Accept all requested permissions.
6 • Turn on the power.
7 • Check that the module is in pairing mode (flashing purple).
Note • if it is not in pairing mode it is necessary to reset.
8 • Read the QR Code on the module box.
9 • If you prefer or don't have the QR Code, can change the button
to Scan nearby and select the module in the devices found.
10 • Enter the name and password of the Wifi network you are
connected to.
11 • Wait for add process be complete.
ADD EXTERNAL DEVICES TO MODULE
1 • Open the MCONNECT app.
2 • Login.
3 • On the external device, for example in an automation, enter the programming mode for new remote
controls.
4 • In the app, press the remote control you want to program and then the desired key until the motor
starts moving.
5 • The programming is complete and you can now control the device through the app.
REMOVE MODULE FROM THE APP
1 • Press on the device you want to remove.
2 • Press on the icon with a gear symbol on the upper right
side of the screen.
3 • Press Remove MCONNECT.
4 • Confirm.