User's Manual

Main Unit
Figure 13: Main unit installation.
When installing the in-vehicle phone avoid positioning the main
unit where it may disrupt the proper operation of the vehicle
and/or its components, such as car stereo, air bags, cubbyhole,
glove compartment, ashtray, lighter, gear stick, hand brake, etc....
Attach the in-vehicle phone to a stable surface, in a position that
is safe and convenient for the driver to use.
Warning: Do not position the main unit in front of the air bag or
where it may impair air bag performance, as the air bag might
inflate in an accident and cause damage.
Verify that the control unit does not face the sun or source of
humidity, such as air conditioner vents.
When the phone is powered off, insert the SIM into the socket at
the right side of the phone.
Speaker
Install the speaker on the side of the central console, ideally
alongside the legs of the passenger sitting beside the driver, as
far as possible from the microphone.
Thread the speaker cable under the carpet along the floor of the
vehicle.
Plug the speaker cable into the compatible connection in the
octopus control cable.
76 – Installation Guide