User's Manual

Power
Switch
Indicator
Light
TURNING H780
ON AND OFF
To turn ON your H780, slide the Power
switch towards the power symbol, as
shown below. The indicator light first flashes
blue for several seconds, then:
To turn OFF your H780, slide the Power
switch off. The indicator light will turn off.
EAR CUSHIONS AND YOUR HEADSET
Your H780 headset is supplied with multiple ear
cushions. Your headset’s performance is greatly
dependent upon achieving a good fit on your
ear. Therefore, we recommend trying all the
supplied ear cushions with your headset.
The ear cushion is fitted onto the end of your
headset’s earpiece speaker like shown, and
placed onto your ear when using your headset.
WEARING THE
HEADSET
To wear your headset, flex the earhook and
loop it over your ear as shown.
Be sure to position the ear cushion into your
ear canal for optimal audio performance and
comfort.
CHANGING FOR USE
ON OTHER EAR
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
European Union Directives
Conformance Statement
Product
Approval
Number
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
Hereby, Motorola declares that this
product is in compliance with:
Gently lift and pull the
top of the earhook up
and off speaker stem, as
shown.
Flip the headset over.
Attach the earhook to
the speaker stem, as
shown.
1
2
3
You can wear your H780 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:
●
flashes blue (if paired and connected with
another device).
becomes steadily blue (if ready to be
paired).
●
When fitting an oval-shaped ear cushion on
your headset, be sure the cushion is oriented,
as shown below (pointing towards the
microphone).
Product
Approval
Number
QUICK BATTERY
CHECK
While turned on and not on a call, you can
check your headset’s battery charge level by
pressing and holding both Volume
buttons.
Note: This feature does not work when headset is in
pairing mode.
The indicator light displays charge status
until you release the buttons.
Headset Indicator Available Talk Time
Red Less than 2 hours
Yellow 2 to 4 hours
Green Up to 6 hours
MAKING CALLS
Note: Your H780 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Function Action
Make a voice dial call Tap the Call button
(Primary phone) and speak the
name after the tone
Make a voice dial call Tap the Call button
(Secondary phone) and either Voume
button and speak the
name after the tone
End a call Tap the Call button,
and hear a
high-to-low tone
Answer a call Open the boom or tap
the call button (if
boom is ready open),
hear the ring tone,
then a low-to-high
tone
Reject a call Press and hold either
Volume button until
you hear a tone
MAKING CALLS CONTINUED
Function Action
Redial last call Press and hold the
Call button until you
hear a tone
Answer a second Press and hold the
incoming call Call button (places
first call on hold), and
hear a tone
Reject second incoming Press and hold either
call Volume button until
you hear a tone
Transfer a call from the Slide the power
headset to the phone button to the OFF
position
Mute or unmute a call Tap both Volume
buttons until you hear
a mute tone
AUDIO TONES
Audio Tone Headset Status
Ring tone Incoming call
Short tone Phone network not
available
High to low tone End call
Two short tones when Volume at minimum
pressing Volume button or maximum
during a call
Ascending tone Mute enabled
Low tone Mute reminder
(repeated every
15 seconds)
Descending tone Mute disabled
Low to high tone Connection
confirmation/voice
activation
No audio indications; Out of range
deteriorating quality
Two tones Low battery
repeated every minute
INDICATOR LIGHT
With the Charger Plugged In
Headset Indicator Headset Status
Red Battery level less
than 50% charge
Yellow Battery level more
than 50% charge
Green Charging complete
With No Charger Plugged In
Headset Indicator Headset Status
Off Power off
Three blue flashes Powering on/off
Steady blue Pairing mode
Quick blue/purple flashes Pairing successful
Quick blue flash Incoming/outgoing call
on primary phone
Quick purple flash Incoming.outgoing call
on secondary phone
Slow blue pulse Connected (on a call)
Slow blue flash Standby (not on a call)
Note: After 20 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
Note: To disable the indicator light, press and hold both
Volume buttons while turnng headset on.
INDICATOR LIGHT
Note: Some features are phone/network dependent.
With No Charger Plugged In
Headset Indicator Headset Status
Red flash Idle (not connected
to phone)
Slow purple pulse Connected call muted
Quick red flash Low battery
Tip: Set your primary and secondary phones to different ring
tones to know which phone is ringing when wearing the
headset. See "Tips for using H710 with Two Phones" for
more information.
INDICATOR LIGHT CONTINUED
USING FAVORITE NUMBER
BUTTON
To program the Favorite Number button
with the current call number, press and hold
the Favorite Number button while in the call
until [xxx] tones are heard.
To place a call using the Favorite Number
button, press and hold the Favorite Number
button until you hear a tone.
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H780.
Features and
Functions Guide
DRAFT
DRAFT