APPLICANT: MOTOROLA, INC. FCC ID: IHDT5ZX1 A draft copy of the latest users manual follows. Note: RF exposure information is provided on page 7.
Table of Contents Getting Started.....................................................4 Welcome ................................................................4 Safety Information..................................................6 Introduction ..........................................................11 Phone Overview...................................................12 Basic Operation .................................................15 Turn Phone On and Off........................................
Table of Contents Memory Protect ...................................................31 Recalling/Scrolling from Memory.........................31 Recalling/Scrolling by Name................................31 Recalling/Scrolling by Location Number ..............32 Last Number Recall .............................................33 Recalling Last 10 Numbers Dialed ......................33 Recalling an Area Code and Prefix (Postscripting) ..34 Turbo Dial..........................................................
Table of Contents PIN Code Activation.............................................56 Timers ..................................................................57 Individual Call Timer ............................................57 Resettable Call Timer ..........................................58 Cumulative Call Timer..........................................58 Individual Timer....................................................59 One-Minute Timer ................................................
Getting Started Welcome Thank you for selecting Motorola – a world leader in cellular technology. All Motorola cellular phones are designed and manufactured in the United States to meet Motorola’s exacting specifications and world-class quality standards. These phones withstand our rigorous durability tests including temperature, humidity, shock, dust, vibration, and a drop test. Product superiority is yours with Motorola.
Getting Started • You will need to have the following information when you inquire about your phone or service. Your ESN (electronic serial number) and MSN (mechanical serial number) are located on the transceiver of your telephone. ESN Number_____________________________ MSN Number ____________________________ Model Number ___________________________ Cellular Phone Number ____________________ • Unlock Code — The sequential code of 123 is the standard unlock code programmed into all phones by the factory.
Getting Started Safety Information IMPORTANT: Read this information before using your wireless mobile phone. Exposure to Radio Frequency Signals Your wireless mobile telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. International agencies have set standards and recommendations for the protection of public exposure to RF electromagnetic energy.
Getting Started reviewed the available body of research to develop the updated ANSI standard. The design of your phone complies with these standards when used as described under "Phone Operation." IMPORTANT: To maintain compliance with the FCC's RF exposure guidelines, if you wear a handset on your body use only the Motorola supplied carrying case, holster or other body-worn accessory for this product and ensure that the antenna is at least 1 inch (2.5 centimeters) from your body when transmitting.
Getting Started Driving Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Observe the following guidelines when using your phone while driving. • Give full attention to driving--driving safely is your first responsibility. • Use hands-free phone operation, if available. • Pull off the road and park before making or answering a call if driving conditions so require. Electronic Devices Most modern electronic equipment is shielded from RF signals.
Getting Started Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Getting Started Potentially Explosive Atmospheres Turn your phone OFF and do not remove your battery when you are in any area with a potentially explosive atmosphere. Obey all signs and instructions. Sparks from your battery in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often but not always clearly marked.
Getting Started Introduction The cellular telephone you have selected represents the state-of-the-art in cellular telephones today. The listing below shows just a few of the exceptional features that your telephone provides.
Getting Started Phone Overview NOTE The telephone you receive may not look exactly like the one shown on the facing page. All features will operate as indicated. Operating Display and Status Indicators Provide a visual indication of telephone numbers and messages associated with mobile telephone service. Green Dot – Lights when unit is powered. In Use – Lights when unit is in use. No Svc – Lights when the unit is out of service range of a cellular system. Calls cannot be placed or received.
Getting Started In Use No Svc Roam 13
Getting Started Control Keypad ‰ Recalls and displays telephone numbers stored in memory. Ç Clears the last digit entered when pressed and released. Press and hold to clear the entire display in the event of an error (does not affect numbers stored in memory). Í Initiates a call to the entered telephone number or answers a call. ∏ Controls power to the unit. Ø Stores telephone numbers into any of the memory locations. ´ Terminates a call in progress.
Basic Operation Turn Phone On and Off 1. If your ignition is on and your telephone is off, press ∏. 2. Press ∏ again to turn unit off. Most users find it convenient to have their mobile telephone turn on and off in conjunction with the vehicle ignition switch. If you want your mobile telephone to operate independently of the ignition switch, discuss this with your installer. We recommend that the engine be running when using your mobile telephone.
Basic Operation Start-up Status Indicators Indicators In Use No Svc Roam In Use No Svc Roam In Use No Svc Roam In Use No Svc Roam 16 Explanation On/Lock Indicator (green light) • Lights steadily to indicate the phone is on and fully operative • Lights steadily to indicate the phone is locked and will not place calls In Use Indicator • Lights steadily while a call is in progress No Svc (No Service) Indicator • Lights steadily if phone is beyond range of a cellular service area • Calls cannot be placed
Basic Operation Place a Call 1. With power on, enter the number you wish to call. 2. Press Í. (You may leave the handset mounted while dialing.) The green In Use indicator will illuminate. You will hear conventional ringing as the call is processed, followed by the called party answering. Pick up the handset and bring it up to your ear, or leave the handset mounted and direct your conversation to the Hands Free microphone for a hands free call.
Basic Operation Tone Tone Description fast busy (reorder signal) Cellular System Busy Press Í again before ending the unsuccessful call attempt to automatically redial the call (see Automatic Redial below), or press ´ and dial the call again. Cellular System Could Not Complete the Call You may have tried to place a call before the green ON/LOCK indicator was lit to let you know your phone was fully operative.
Basic Operation Redial by turning off the phone or ignition, or by pressing ´. NOTE Automatic Redial applies when the system is busy, and will not engage when the called party’s line is busy. End a Call Press ´ or return the handset to its mount. The green In Use indicator will extinguish. If you have activated the Automatic Hands Free feature, you must press ´ to terminate the call. You may terminate a call or procedure (except Master Reset and Clear) at any time by pressing ´.
Basic Operation Signal Strength Meter The Signal Strength Meter (SSM) represents the relative strength of the signal received by your phone. The SSM is displayed as a bar graph following the letter S at the left side of the display. The S alone represents the lowest strength with each additional bar representing a stronger signal. S WEAK SIGNAL S––==≠≠ STRONG SIGNAL The SSM appears every time you turn your phone on, unless this feature is turned off through the feature menu (refer to pg. 48).
Basic Operation v v––==≠≠ LOWEST VOLUME SETTING HIGHEST VOLUME SETTING The number of bars represents the number of volume steps for speaker, earpiece, and ringer volume. The volume levels can be adjusted by the use of ≤ and ≥. Speaker Volume 1. With the handset mounted, press and hold ≤. This will raise the volume. 2. To lower the volume, press and hold ≥. The number of bars on the Volume Meter will decrease. The maximum number of bars that will appear on the display is six bars.
Basic Operation Ringer Volume Press Ï and use ≤ and ≥ as described above. The maximum number of bars that will appear on the display is six bars. v––==≠≠ Display Own Phone Number 1. Press ‰, £. 2. The phone number that is currently active will be displayed. 3. When you have finished viewing, press Ç. Switch to Second Phone Number 1. Press ‰, £, Ø. 2. The display will go blank to confirm the switch and the newly activated number will appear. 3. When you have finished viewing, press Ç.
Basic Operation it displays a message indicating which home system type and phone number is currently active.
Basic Operation Standard Mode for system 2 (and phone number 2). Whenever you switch back to System 1, your telephone will operate in Home Only mode again. The Roam indicator will operate based on the active system (see page 67 for detailed information on Roaming). For example, if your active system is A1 and you are roaming on a wireline (B) system, the Roam indicator will flash rapidly. Each system (and phone number) has its own cumulative and resettable call timers.
Basic Operation Manual Handset to Hands Free Operation 1. If you are using the handset and want to switch to Hands Free operation, press Ï, fl. 2. Mute will display. Note that M for Mute appears on fl. 3. Return the handset to its mount. 4. Press Ï, fl again and HF will display. 5. Direct your conversation to the Hands Free microphone. Automatic Hands Free 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≥ or ≤ (• or £) until –HANG UP FOR HF displays. 3.
Memory Storing Information in Memory Your telephone provides memory capable of storing up to 99 frequently called phone numbers as well as a fourteen-character name tag. Upon entering a phone number in memory, the phone will prompt you to store an associated alphabetic name. If you are not interested in creating a name tag for the selected location, alpha entry may be bypassed and just the phone number would be stored. (Refer to page 28 for details.
Memory Details on Utilizing Alpha Entry Mode Once in Alpha Entry Mode, you can enter letters using your numeric keypad. For example, ‘A’ is at the first press of ¤, ‘B’ is at the second press of ¤, and ‘C’ is at the third press of ¤. Key ¤ ‹ › fi fl ‡ ° · 1st Press 2nd Press 3rd Press A B C D E F G H I J K L M N O P Q R T U V W X Y 4th Press S Z EXAMPLE To enter ‘Bob’ and his phone number 555-1234 into memory location 01: 1. Enter phone number by pressing fi, fi, fi, ⁄, ¤, ‹, ›. 2.
Memory NOTE If Full displays, refer to Memory Protect on page 31. Storing Phone Number Only 1. Enter the phone number you wish to store, up to 32 digits. 2. Press Ø. 3. Enter two-digit location number or press • for Autoload. 4. The phone is automatically in Alpha Entry Mode. The display will flash ALPHA or sto. Press Ø to bypass. 5. Phone will confirm storage by displaying memory location number. NOTE If Full displays, refer to Memory Protect on page 31. Storing Area Code and Prefix (Postscripting) 1.
Memory convenient means of postscripting the four-digit extension of the party you wish to call. To place a call from this type of memory location, simply recall the location and enter the four-digit extension before pressing Í. There are three ways to select a memory location. You can select a specific location number; you can choose to autoload which will store the information in the next sequentially available location; or you can arrange the directory into blocks. Store to a Location Number 1.
Memory NOTE If Full displays, refer to Memory Protect on page 31. This procedure automatically stores memory entries into the next available memory location. This method serves particularly well if you do not remember the next available memory location. Memory Blocks 1. Enter phone number to be stored. 2. Press Ø. 3. Enter the first digit of the desired block – ‚, ⁄, ¤, etc. 4. Press •. 5. The phone is automatically in Alpha Entry Mode. Enter a name or continue to step 6. 6. Press Ø. 7.
Memory Memory Protect The directory has an automatic memory protect feature which prevents the accidental overwriting and loss of previously stored names and numbers in memory. If you attempt to store a number or name in a location that already contains an entry, the phone will display FULL and the name/number in that memory location. The display will then show the previously stored number and alternate between the name stored and CHANGE?.
Memory Use ≤ and ≥ (• and £) to scroll forward and backward. To begin scrolling from a specific letter of the alphabet, press Ï, ‹, then the letter from which you wish to start. If no entries are stored under this letter, the unit automatically searches forward, alphabetically, until the next name is found. To view the associated phone number 1. Press ‰. The display will flash the location number, then the phone number. 2. Press ‰ again to view the name.
Memory Use ≤ and ≥ (• and £) to scroll forward and backward. To scroll from a specific two-digit location, press ‰, then the location number where you wish to begin scrolling. The phone will display an apostrophe (’) after the memory location number to indicate that memory scrolling is active. NOTE If you have the Name Preference feature selected, the above information is reversed. Refer to the Number Preference section on page 52 for more details. Last Number Recall 1.
Memory This feature allows you to refer to or redial any of the last ten phone numbers to which calls were placed. The numbers are stored in the order placed and always represent the ten most recent calls. Successive calls to the same number are stored only once, and all are retained when the unit is shut off. NOTE When scrolling, you may observe that a location number is skipped. This may be caused by pressing Í when the display is empty and does not mean that a number has been lost.
Memory key and holding for approximately one second. There is no need to press Í. NOTE If you wish to use memory location 1 for a non-emergency number, the Emergcy message may be deactivated through the feature menu (refer to page 48). In order to prevent the accidental pressing of these keys, Turbo Dial can be deactivated through the feature menu. NOTE Turbo Dialing is affected by Call Restriction Service Levels 1, 2, 3, and 8 (see page 62).
Memory Scratch Pad Memory The scratch pad permits entry of numbers from the keypad during conversation. If your party gives you another number to call, simply enter this from the keypad. If you make an error, press Ç to erase the last digit entered or hold Ç to erase the entire entry. Advise your party that they will hear tones as you store the number. To call the scratch pad number at the end of an ongoing conversation, press ´, Í.
Memory To tone dial from a memory location, place the initial call. Recall from memory (using ‰, location number) the number you wish to send as DTMF digits. Press ‰, Í. Repeat these steps as required to send separate groups of numbers. Two-part calling can be automated by a unique feature which permits the programming and memory storage of pauses between groups of numbers. When recalled or sent, the telephone stops transmitting at the pause and waits for your response (i.e., secondary dial tone).
Memory Pause Dialing (Memory Linking) 1. Enter the first group of numbers from the keypad or recall them from memory using ‰. 2. Insert a pause by pressing Ï, Í. ø will appear where the pause is inserted. To store, press Ø. 3. Enter the next group of numbers, or recall them from memory by pressing Ï, ‰, two-digit location number. 4. Repeat this sequence for as many groups as you wish up to a maximum of 32 digits. (Each pause occupies a digit.
Memory Instruction and Key Sequence 1 Enter the phone number of the bank — ⁄, ¤, ‹, ›, fi, fl, ‡ or recall it from memory location xx — ‰, x, x 2 Create a pause — Ï, Í Display 1234567 INSERT PAUS ø 3 Press Ø 4 Enter the ID number and a pound sign — °, °, °, £ or recall it from memory location xx — Ï, ‰, x, x 5 Create another pause — Ï, Í 1 234567ø 12345 67ø888C INSERT PAUS ø 6 Press Ø 123456 7ø888Cø 7 Enter the account number and a pound sign — ¤, ¤, £ 34567ø8 88Cø22C 8 To store number, press Ø and
Memory After waiting for the system response, press Í to send the second group of numbers. Continue to press Í until all digit groups are sent. If the PIN code feature is activated (see page 56), the PIN code will automatically be sent after the first pause by pressing Í. To store a linked sequence, press Ø, then enter the location number where you wish to store the number. Each memory location will only accept up to 32 digits. NOTE Long Tone DTMF signals cannot be sent using this procedure.
Memory 3. Press ‚. (Long distance carriers typically require that a 0 be placed before the number you are calling.) 4. Press Ï, Í, £. NUM ‘N’ will display. This serves as a marker for the spot where the phone number you wish to call will be automatically inserted into the sequence. 5. Press Ø. This stores the N character. 6. Insert another pause by pressing Ï, Í, Ø. ø will appear where the pause is inserted. 7. Enter your credit card PIN number. 8.
Memory Instruction and Key Sequence Display 1 Enter the access number. 1800 1234567 2 Enter a pause — Ï, Í INSERT PAUS ø 3 Press — Ø 18001 234567ø 4 Press — ‚ 180012 34567ø0 5 Enter a pause — Ï, Í INSERT PAUS ø 6 Press — £ NUM ’N 7 Press — Ø 8001234 567ø0 ’N 8 Enter a pause — Ï, Í INSERT PAUS ø 9 Press — Ø 10 Enter your credit card PIN number 0012345 67ø0 ’Nø 67ø0’Nø 8901234 11 To store number, press Ø and the One Touch Dial key or the Turbo Dial key.
Memory To place a call using your credit card: 1. Recall and send the credit card memory location. You can do this in the following ways: a. If the credit card number is stored in a One Touch Dial location, simply press and hold the appropriate One Touch Dial key for one second. b. If the credit card number is stored in a Turbo Dial location (1-9), simply press and hold the appropriate key for one second. 2. The display will flash Enter Number. This is the prompt to enter the phone number you wish to call.
Memory wait for the next system response and press the One Touch Dial key again. IMPORTANT If your credit card number is stored in a Turbo Dial location, you must press Í rather than the Turbo Dial key to send additional groups of numbers. EXAMPLE Use the credit card information stored in One Touch Dial location 1 to place a credit card call to a ten-digit phone number stored in memory location 3. Instruction and Key Sequence Display 1 Recall and send your credit card number.
Memory One Touch Dialing Keys Press and hold the One Touch Dial Key ≈, ¥, or Ω. To Store a Number 1. Enter phone number to be stored. 2. Press Ø. 3. Press specific One Touch Dial Key. 4. The phone is automatically in Alpha Entry Mode. Enter a name or bypass by pressing Ø. 5. Phone will confirm storage by displaying Stored. These keys function like Turbo Dial keys. When you press and hold ≈, ¥, or Ω, a call is placed to the number stored in that position.
Memory Emergency dialing can be deactivated by using the feature menu found on page 48. When this feature is deactivated, the number stored in memory location 01 will still be dialed if the phone is unlocked and if you press and hold ⁄, but Emergcy will not display. NOTE Automatic Redial does not work with emergency dialing while the phone is locked. Change Memory Entries Alpha or Numeric 1. Press ‰ and the two-digit location number. 2.
Memory Clear Memory Entries Clearing via Memory Name 1. Press Ï, ‹ to enter alphabetic memory. 2. Review the memory locations using memory review (see page 31), and recall the entry you wish cleared. 3. Press Ç. The unit will display Clear?. 4. Press Ø to clear both name and number. or Press ´ to exit without deleting the entry. Clearing via Memory Location Number 1. Press Ç, Ø, and the two-digit location number to be cleared. 2. ALPHA or sto will display. Press Ø to bypass. 3.
Features Feature Menu The feature menu permits review, selection, and cancellation of most of your telephone’s features through the keypad and display. The chart below shows all features available through the menu and the pages where detailed information is found.
Features Additional telephone features, that may be available with your phone but are not accessed through the feature menu, are also described in this section. To Select/Cancel Menu Features 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≥ or ≤ (• or £) until the desired feature displays. 3. Press Ç to toggle the feature off or Ø to activate. 4. Press ´ to exit the feature menu. EXAMPLE To activate silent keypad, press Ï, ⁄, and scroll with £ or ≤ until the display shows keypad tone on.
Features Feature Status Review To Review Status 1. Press Ï, ‚, ·, ‰. 2. Press ≤ or ≥ (• or £) to scroll messages. 3. To activate a feature that is displayed press Ø.. To deactivate a feature press Ç. To End Review Press ´. Microphone Muting To mute microphone Press Ï, fl. To disable mute Press Ï, fl again. This feature allows you to confer privately with others in the car during a call. It will disable the microphone and display Mute. Note that M for Mute appears on fl.
Features call. This is useful if you intend to be outside of the vehicle and expect a call. NOTE Determination of whether the Auxiliary Alert feature is desired and, if so, which alerting device is to be used is made at the time of installation. Note that H for Horn appears on ›. The external alerting device (horn or lights) will only respond if the vehicle ignition switch has been turned off. NOTE A call cannot be in progress when you enable Auxiliary Alert. Auto Answer is disabled during Auxiliary Alert.
Features Number Preference 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≥ or ≤ (• or £) until number pref on displays. 3. Press Ç once to toggle this feature off, and Ø to toggle it on. 4. To exit the feature menu, press ´. The Number Preference feature reverses the display order of memory entries so that the number will be displayed before the name. Automatic Answer 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≥ or ≤ (• or £) until auto ansr off displays. 3.
Features Multiple Key Answer 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≤ or ≥ (• or £) until multkey ansr off displays. 3. Press Ç once to toggle this feature off, and Ø to toggle it on. 4. To exit the feature menu, press ´. The Multiple Key Answer feature allows you to answer an incoming call by pressing Í or any digit key ⁄ through ·. Call Receive 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≥ or ≤ (• or £) until Call rcv on displays. 3.
Features NOTE We suggest you do not select Incoming Call Screening and Silent Ringer simultaneously since the incoming call will not be signalled by a short burst of tone. Ringer 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≥ or ≤ (• or £) until ringer on displays. 3. Press Ç once to toggle this feature off, and Ø to toggle it on. 4. To exit the feature menu, press ´. The telephone’s ring tones may be silenced where they could prove a distraction, as during a business conference, etc.
Features Scratch Pad Tones 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≥ or ≤ (• or £) until scrpad tone on displays. 3. Press Ç once to toggle this feature off, and Ø to toggle it on. 4. To exit the feature menu, press ´. Use this feature to enter scratch pad numbers during a call without transmitting DTMF tones. You will hear the tones, but your called party will not. NOTE Should you wish to transmit DTMF tones (to access answering machines, pagers, automatic menus, etc.
Features PIN Code Activation Activate PIN Code 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≥ or ≤ (• or £) until pin inactive displays. 3. Press Ç once to toggle this feature off, and Ø to toggle it on. 4. To exit the feature menu, press ´. Store PIN Code in Memory Location 07 1. Enter PIN code. 2. Press Ø. 3. Press ‚, ‡. Place a Call With PIN Code Active 1. Enter number to be called, or recall from memory. 2. Press Í. Wait for double tone – “beep, beep.” 3. Press Í.
Features number in memory location 7. The PIN code must be less than seven digits. If you enter a service area which does not require a PIN code, disable the feature in the feature menu. Timers Call timers provide a useful means of monitoring the air-time spent in conversation. Several of these operate in the background and can be displayed at any time. Another offers tones heard only on your side of the conversation.
Features Resettable Call Timer To Display Press ‰, £, £, £. To Reset Press Ï, ‚, ‡, Ç. This timer accumulates the air-time in minutes from the point at which it is reset. This resettable timer is generally utilized to track monthly air-time usage and is set in conjunction with the monthly billing cycle. NOTE If you have two phone numbers programmed in your phone, each phone number has its own resettable call timer.
Features Individual Timer 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≥ or ≤ (• or £) until indiv timroff displays. 3. Press Ç once to toggle this feature off, and Ø to toggle it on. 4. To exit the feature menu, press ´. This feature automatically displays the accumulated time in minutes and seconds during and after each call. One-Minute Timer 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≥ or ≤ (• or £) until one min timroff displays. 3. Press Ç once to toggle this feature off, and Ø to toggle it on. 4.
Features Electronic Lock To Lock 1. Press Ï, fi. 2. Lock? will display. 3. Press Ø to lock. 4. Press ´ to exit. To Unlock Enter your three-digit unlock code. If you make an error, press Ç and start again. The electronic lock prevents use of the telephone by disabling both incoming and outgoing calls. To help remember which key to use, note that L for Lock appears on fi. If a call is received during this period, the phone will ring and you must enter the unlock code before the call can be answered.
Features NOTE Use this procedure if you have forgotten your current three-digit unlock code. Automatic Lock 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≤ or ≥ (• or £) until auto lock off displays. 3. Press Ç once to toggle this feature off, and Ø to toggle it on. 4. To exit the feature menu, press ´. This feature automatically locks your phone each time it is turned off. Theft Alarm To Select (On) 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≤ or ≥ (• or £) until theft alrmoff displays. 3.
Features not enter your unlock code within 30 seconds, an alerting call will be placed to the phone number you have stored in this feature. If the phone receives a busy signal, it will repeat the call automatically. Anyone answering the call will hear alternating high and low pitched tones (siren). If you elected to have the Auxiliary Alert feature installed, the auxiliary alerting device will also be activated. The phone will then repeat the call.
Features Your telephone can be set to restrict call placement (as when lending the phone to another person). Using the six-digit security code, you may select one of the following levels of restriction. Service No restrictions. (Standard setting) Full keypad and directory dialing. No storage in directory locations 1-10 or One Touch Dial locations. Keypad dialing only. No directory or Turbo Dial access. Phone will place calls from all directory locations (‰, ‚ ⁄ - · ·, Í). No keypad dialing.
Features Master Reset CAUTION Once begun, this procedure cannot be canceled or reversed. 1. Press Ï, ‚. 2. Enter your six-digit security code twice. 3. Press ⁄, Ø. This feature allows you to reset the user selectable options to their standard settings. Master Clear CAUTION Master Clear performs all the functions of Master Reset, in addition to erasing all names and numbers stored in memory, and clearing the Resettable Call Timer. Once begun, this procedure cannot be canceled or reversed. 1. Press Ï, ‚. 2.
Features 5. Press Ø to choose the desired language. 6. To exit the feature menu, press ´. This feature allows you to change the language that your menus and messages are displayed in. You can choose from four different languages (English, Spanish, French and Portuguese). Extended Talk 1. Press Ï, ⁄. 2. Scroll the menu by pressing ≤ or ≥ until Extend Talk On displays. 3. Press Ç once to toggle this feature off and Ø to toggle it on. 4. To exit the feature menu, press ´.
Reference The Cellular System There are generally two types of cellular systems serving any metropolitan area. One of these will most likely be operated by the telephone company that provides telephone service to your community, generally referred to as a wireline carrier. The other cellular service provider is a radio common carrier, referred to as a non-wireline carrier. Your Cellular Service Operator will provide information concerning specific features, procedures, and coverage in your particular area.
Reference the phone will operate. Most systems do not impose air-time charges for such call attempts. NOTE This indicator is controlled through the initial programming of your phone and is usually deactivated. Refer to the Programming Guide under Step 11 for more details. Switchhook and Enhanced System Services Press Í. During a call, pressing Í performs a switchhook function used to access enhanced Cellular System features such as call waiting and conference calls.
Reference To use alternate long distance services when roaming, be certain to dial the appropriate area code and local number to access the alternate carrier in the visited area. Then use the tone dialing sequence described on page 36. If you selected two-system operation (see page 22), enter ‰, £ to verify the currently active number. This is especially important if your two home systems have different area codes, or if Roam is flashing within your home service area.
Reference System Type Selection Your telephone seeks cellular service according to the mode you have selected. If you have selected two-system operation, the phone seeks cellular service according to the system type mode selected for each phone number. Constant flashing of Roam, or a steadily lit No Svc while within your home service area may indicate an unintentional choice has been made.
Reference System Type Selection Standard Mode Your phone first seeks a home type system, then a non-home type. Display Std A B Std B A Invert Preference Mode Your phone first seeks a non-home type system, then home type. (Select this mode if in a fringe area of your home system or in certain roaming situations.
Reference Troubleshooting Is the unit locked? See Electronic Lock, page 60. Is the No Svc (No Service) indicator lit? See Status Indicators, page 16. Have you programmed a unique operating mode? Constant flashing of the Roam indicator while in your home service area may indicate that an incompatible system type has been selected. See Roaming, page 67. Is the unit operating with non-standard settings? You may have inadvertently selected improper operating characteristics. See Feature Status Review, page 50.
Reference Quick Reference Feature Guide Basic Operation Turn It On Lock Unlock Turn It Off Place a Call Receive a Call End Call ∏. Ï, fi. Three-digit unlock code. ∏. Enter number, Í. Í, or lift handset to ear. ´, or return handset to its mount. Volume Control Earpiece Lift handset, ≤ or ≥. Speaker With handset mounted, press and hold ≤ or ≥. Ringer Ï, then ≤ or ≥. Store to Memory Number Only Phone number, Ø, twodigit location. To store in next available location, Ø, •.
Reference Feature Menu Enter Menu Ï, ⁄. ≥ or ≤ (• or £) to scroll. Select Feature Ø. Cancel Feature Ç. Exit ´. Additional Features Status Review Ï, ‚, ·, ‰. ≥ or ≤ (• or £) to scroll. Last Number ‰, Í. Recall Display Own ‰, £. Number Activate Other ‰, £, Ø. Number Mute Microphone Ï, fl. Scratch Pad Enter numbers during call. ´ to terminate call and Í to place call to scratch pad number.
Reference Message Glossary ’ A A1 A2 ARMED B––==≠≠ B1 B2 BUSY C CALL delayed HOME LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 LEVEL 5 LEVEL 6 LEVEL 8 MUTE 74 (Apostrophe) Scrolling activated • displayed as “A” Two System Operation (Active system is non-wireline, using phone number 1.) Two System Operation (Active system is non-wireline, using phone number 2.
Reference ON R S––==≠≠ Telephone is on Precedes display of Resettable Timer Signal Strength Meter (SSM) (number of bars indicates relative signal strength) SCAN A System Type Selection (scan “A” only) SCAN AB System Type Selection (scan “A” type first, then “B”) SCAN B System Type Selection (scan “B” only) SCAN BA System Type Selection (scan “B” type first, then “A”) STD All user features set to standard System Busy Cellular system is busy V––==≠≠ Volume Meter (number of bars indicates relative volume leve
Reference Rules, Regulations, & Precautions The U. S. Federal Communications Commission and the Canadian Department of Communications regulate cellular radiotelephone service in their respective countries. It is important for you, the cellular radiotelephone user, to observe the applicable regulations when operating your cellular phone in either country. In addition to these U. S.
Reference License If your home system is in the U. S., you do not require a separate license to operate your cellular telephone; obtaining a cellular telephone access number is sufficient to register you as a user. If your home system is in Canada, a separate license is required; your carrier will assist you in the licensing process. If you wish to use your cellular phone on both sides of the border, please contact your Cellular Carrier (System Operator).
Reference permit a third party to monitor the radio channels used for cellular telephone calls. Interference No person shall interfere with or cause interference to any radio communication or signal. Equipment Modifications The U.S. Federal Communications Commission has type-approved and the Canadian Department of Communications has granted technical acceptance to the model of cellular telephone which you have purchased, and both have allocated a specific frequency range for cellular service.
Reference Index Automatic Answer...........................................52-54 Automatic Hands Free...................................19, 25 Automatic Lock ....................................................61 Automatic Redial ......................................18-19, 46 Auxiliary Alert.................................................50, 62 Call in Absence Indicator.....................................19 Calling Card Dialing.......................................37, 40 Cancel Menu Features ...........
Reference Master Clear ..................................................64, 74 Master Reset .................................................19, 64 Memory Autoload...........................................29, 31 Memory Blocks ...............................................30-31 Memory Linking ..............................................37-38 Memory Location Directory..................................83 Memory Protect ........................................28-31, 46 Message Glossary ....................
Reference Rules, Regulations, & Precautions ................11, 81 Scratch Pad Memory ...........................................36 Scratch Pad Tones ........................................36, 55 Scrolling by Location Number..............................32 Scrolling by Name................................................31 Scrolling from Memory.........................................31 Security Features.................................................59 Selectable System Registration.....................
Reference Patent Information Manufactured under one or more of the following US patents. 4121218 4648125 4138681 4649543 4193036 D288683 4254382 4654655 4302845 D289156 4312074 4662691 4327319 4667333 4329666 4668917 4369516 4670747 4369522 4672502 4378603 4680787 4390963 4681476 D269873 4683585 4398265 4692726 4400584 4704588 4400585 D292578 D270835 4706036 D271491 D292920 Re.
Reference Memory Location Directory Location Name Phone Number 83