RazrWire_Quickstart BW Final 8.25 x 5.25 5/11/05 9:31 AM Page 2 ™ ® ©2005 OAKLEY, INC.
© 2005 Oakley, Inc. Oakley, Ellipse logo, O Matter, Plutonite, Microclear, Razrwire, Unobtainium, and XYZ Optics are trademarks or registered trademarks of Oakley, Inc. in the United States and other countries. All other brand and product names listed are trademarks or registered trademarks of their respective holders and are hereby recognized as such. Sunglasses Made in USA & Bluetooth Unit Made in China. U.S. Patent Nos. owned by Oakley, Inc.: 5.648.832, 5.689.323, 5.969.789, 6.010.218, 6.168.271 B1, 5.
® TM OAKLEY® RAZRWIRE™ is the first eyewear to combine patented Oakley optics with wireless Bluetooth® technology. It frees you from wires by offering hands-free mobile communications anywhere and everywhere you want to be. Fully integrated electronics let you easily handle incoming and outgoing calls to your Bluetooth enabled cell phone from a range of up to thirty-three feet. Answer a call instantly without digging for your cell phone.
Charging the Unit Important: Charge the Bluetooth unit for 2.5 hours before using it the first time. Assembling TM RAZRWIRE includes your Oakley eyewear and a Bluetooth unit. Here’s a quick anatomy lesson of the unit. To charge the unit: 1 Plug the charger plug into a electrical wall outlet. 2 Open the rubber cover on the top part of the unit and plug the silver side of the charger cable into the charging port. Charging Port Ear Speaker Be sure to align the plug correctly.
Removing the Unit from your Eyewear To remove the unit from your frames: 1 Hold the body of the unit in your right hand. 2 Hold the arm of the eyewear frame that the unit is attached. 3 Gently twist the unit until the clamp snaps open and you can remove it from the frame. Pairing with your Phone TM You must pair (or bond) your RAZRWIRE unit with your phone before they will work together.
Using TM Adjusting RAZRWIRE for a Comfortable Fit You may need to adjust the position of the unit so that the speaker fits comfortably in your ear. To do so, simply slide the unit forward or back along the frame temple. Answering & Ending a Call To answer an incoming call: Press the Multifunction Button until you hear the call is answered. To end a call: Press the Multifunction Button.
Advanced TM Adjusting the Volume To turn the volume up: Making Calls Press the Volume Up (front) button repeatedly to increase the volume. While wearing the eyewear and unit, make a call by: To turn the volume down: 1 On your phone, dial the phone number. 2 On your phone, press Send. You will hear the ringing while waiting for the recipient to answer the call. Press the Volume Down (back) button repeatedly to decrease the volume.
Mounting the Unit on the Left Side of your Eyewear 4 Fold open the ear speaker. 5 Open the attachment clamp and hold RAZRWIRE in your left hand. 6 Hold the left arm of the frames in your right hand. 7 Drop the left arm of the frames into the groove of the attachment clamp. 8 Snap the top of the attachment clamp closed. Since the unit is set to be on your right ear in the package, you’ll need to do a few extra steps to mount it on the frames for your left ear.
Indicator Light and Audio Tone States The following table explains indicator light and audio tone states. Function Headset Indicator Light Audio Tone Power On Off Flashes 3 times while powering on. Four tone scale. Starts at a low-pitch and continues to high-pitch. Power Off On Flashes 2 times while powering off. Four tone scale. Starts at a high-pitch and continues to low-pitch. Pairing On On Solidly lit during pairing process. Flashes 10 times when pairing is successful.
Safety and General Information automobile, motorcycle, equipment or any other motorized mode of transportation to reduce the risk of accident or injury. Avoid Hearing Damage IMPORTANT ON SAFE AND EFFICIENT OPERATION. READ THIS Safety andINFORMATION General Information INFORMATION BEFORE USING YOUR DEVICE.
Battery Do not attempt to remove the internal rechargeable battery. Disposal of devices that contain internal rechargeable batteries must be in accordance with local environmental regulations. Temperature • Do not store or use RAZRWIRE in temperatures lower than -20°C / -4°F or higher than 50°C / 122°F. • Do not recharge RAZRWIRE in temperatures lower than 0°C / 32°F or higher than 40°C / 104°F. • Conditions inside a parked car can exceed this temperature range. Do not store RAZRWIRE in a parked car.
How to keep the best at their best All Oakley Lenses: To help maintain the High Definition Optics® (HDO®) of Oakley lenses, your new eyewear comes with a specially-woven electrostatic Microclear™ bag for cleaning and storage. Using it will preserve the superior optical quality of Oakley's pure Plutonite lenses. Hand wash and air-dry the Microclear bag regularly. Iridium® Lenses: Oakley Iridium lens coating is engineered to reduce glare and improve contrast.
Products Covered Length of Coverage Exclusions Products and Accessories that are Repaired or Replaced. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. Software Embodied in Physical Media.
What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Industry Canada Notice to Users Export Law Assurances Operation is subject to theNotice following two conditions: (1) This device may not cause interference and Industry Canada to Users (2) This device must accept any interference, including interference that may cause undesired operation of the device Ref IC RSS 210 Sec. 5.11.
RazrWire_Quickstart BW Final 8.25 x 5.25 5/11/05 9:31 AM Page 2 ™ ® ©2005 OAKLEY, INC.