User's Manual
Table Of Contents
4
Removing the Unit from your Eyewear
To remove the unit from your frames:
1
Hold the body of the unit in your right
hand.
2
Hold the arm of the eyewear frame that
the unit is attached.
3
Gently twist the unit until the clamp
snaps open and you can remove it from
the frame.
Pairing
TM
with your Phone
You must pair (or bond) your RAZRWIRE unit with your phone before they will
work together. This procedure only needs to be performed once and then the
next time you turn on your RAZRWIRE unit and phone they will automatically pair.
To pair your unit and phone:
1
On your Motorola phone
*
, select
M
(Menu) > Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
2
With the unit turned off, press and hold
the
Multifunction Button
until you
hear a high-pitched tone in the ear
speaker.
Note:
When the unit is successfully in
pairing mode the indicator light will
remain solidly lit.
3
The phone lists all Bluetooth devices it finds. Select
Oakley RAZRWIRE
.
4
Select
OK
or
Ye s
to pair (bond) the headset.
5
Enter the passkey:
0000
6
Select
OK
.
7
When your RAZRWIRE is successfully paired with your phone, the Indicator
Light flashes ten times and automatically turns on for use.
Note: *
These steps are for most Motorola phones. For other phones, see your
phone user's guide.
Multifunction
Button
Indicator
Light
Volume
Up
Volume
Down
Microphone