User's Manual

19
Before Using the FOMA Terminal Available Communications
• Communication charges become high when performing
communications with large data such as browsing Web
sites with many graphics or downloading data.
• The “FOMA Packet Byte Counter” can be downloaded
from the DoCoMo application download Web site.
http://www.nttdocomo.co.jp/support/download/index.
html
64K Data Communication
Charges for this communication method are
based on the duration of the connection.
This method uses a connection that allows
FOMA 64K data communication such as mopera
U/mopera, DoCoMo’s Internet connection
service or allows ISDN connection supporting
synchronized 64Kbps.
• Communication charges become high when connecting
for a long time. Digital communication charges apply.
Usage Notes
■ Internet Service Provider Fees
Fees to an Internet service provider may be
required to connect to the Internet. These fees
are added to the FOMA service fees and are paid
to your Internet service provider directly. For
details on connection fees, contact your Internet
service provider.
You can subscribe to mopera U/mopera,
DoCoMo’s Internet connection service.
To use mopera U, a separate subscription is
required (charges apply). To use mopera, no
subscription is required and no monthly usage
fees apply.
■ Setting the Internet Connection
Packet communication and 64K data
communication use different access points. For
packet communication, use an access point
compatible with packet communication, and for
64K data communication, use the FOMA 64K
data communication or use an access point
compatible with ISDN-synchronized 64K.
• DoPa access points cannot be connected.
• Access points for PHS 64K/32K data communication
for PIAFS, etc. cannot be connected.
■ User Authentication to Access Networks
Depending on the access point, user
authentication (ID and password) may be
required to connect. If required, enter the ID and
password from the dial-up network. The ID and
password will be provided by the network
administrator of your Internet service provider or
the access point. For details, contact your
provider or access point network administrator.
■ Access Authentication for Browsing
FirstPass (user certificate*) is required for access
authentications to browse FirstPass sites. Install
the FirstPass PC Software from the included CD-
ROM and configure the settings.
For details, refer to “FirstPass Manual” (PDF
format) contained in the included CD-ROM.
Adobe Reader (version 6.0 or later is
recommended) is required to view the file.
The latest version of Adobe Reader can be
downloaded from the Adobe System’s Web site
(separate communication charges apply).
For details, refer to the Adobe System’s Web site.
*: This FOMA terminal cannot acquire the user
authentication required for FirstPass directly.
After submitting the application form, downloading the
user authentication or changing the PIN2 code by
inserting your UIM into another FirstPass compatible
FOMA terminal, re-insert the UIM into the FOMA
terminal to start using it. For submitting the application
form and downloading the user authentication or
changing the PIN2 code, refer to the instruction manual
of the FirstPass-compatible FOMA terminal you use for
this purpose.
■ Requirements for Packet and 64K Data
Communications
The following conditions must be met to perform
communications using the FOMA terminal.
However, a connection may not be established if
traffic is heavy at the base station or if radio
signals are weak.
• The FOMA terminal must be in a FOMA service area.
• The access point must support FOMA packet
communication for packet communication.
• The access point must support FOMA 64K data
communication or ISDN connection supporting
synchronized 64K communication.
• The “FirstPass PC Software” can be downloaded from
the DoCoMo application download Web site.
http://www.nttdocomo.co.jp/support/download/index.
html