User's Manual

24
Setting Up
Setting Up
Install the following software from the included CD-
ROM for the FOMA M2501 HIGH-SPEED terminal.
Operating Environments
Use the Communication Configuration File
(driver) and the FOMA PC Configuration
Software under the following operational
environments:
*1: Japanese Version Service Pack 4 or later
*2: Japanese Version Service Pack 1 or later
• Required memory or available hard disk space may vary
depending on the system environment.
• Depending on the operating environment, the software
may not work. DoCoMo does not respond to any
inquiries about the use, guarantee proper operation, nor
is responsible for proper operation under operating
environments other than the above.
• DoCoMo does not guarantee the operation under the
supported OS if the OS is changed through upgrade.
Communication
Configuration File (Driver)
The Communication Configuration Files
(drivers) are required to connect to the PC for
the first time.
Installing
• Remove the FOMA terminal from the PC before starting
the software installation.
• Log into a user account with the Administrator or PC
supervisor privileges. An error will occur during installation
if you log into an account without these privileges. For
details on setting up Administrator or PC supervisor
privileges, contact your computer manufacturer or
Microsoft Corporation.
For Windows XP
a
Start Windows and insert the FOMA
M2501 HIGH-SPEED CD-ROM to the PC
b
Click [スタート (Start)] y “ファイル名を指
定して実行 (Select file name and run)”
c
Click [参照 (Browse)] to specify the file
setup.exe, then click [OK]
• Specify the file “<CD-ROM drive letter>:/Drivers/setup.
exe” (the CD-ROM drive letter varies depending on the
configuration of your PC).
Item Requirement
PC Main Unit PC-AT compatible
The PC must have a PC card slot of
PCMCIA TYPE II.
OS Windows 2000 Professional*
1
,
Windows XP Professional/Home
Edition*
2
Required Memory 128Mbytes or more
Hard Disk Space 50Mbytes or more available space
Display 800 x 600 pixels or more
recommended
1
Installing the Communication
Configuration Files
The communication configuration software
(drivers) makes communication possible using
the FOMA terminal.
• Windows XP →P24
• Windows 2000 →P26
2
Installing the FOMA PC Configuration
Software
The FOMA PC configuration software allows you
set up packet communication/64K data
communication using simple steps.
• Steps in Common for Windows →P31
3 Configuring Communication Settings
Configure settings to establish a connection
with packet communication/64K data
communication.
• Setting up Packet Communication Using the Easy Settings
of the PC Configuration Software →P32
• Setting up 64K Data Communication Using the Easy
Settings of the PC Configuration Software →P32
• Setting up Communication without Using the PC
Configuration Software →P37
4 Establishing a Connection
Connect to the Internet.
Setting Up/Installing the Driver