User's Manual

43
Setting Up
AT+CGREG=<n>
[&F] [&W]
[?] [=?]
Set whether to be notified of the
network registration status.
n=0 (default) : Do not notify.
n=1 : Notify when outside
and inside the service area is
changed.
Execute “AT+CGREG?”
then appears as “+CGREG :
<n>,<start>”.
n : Setting value.
start=0 : Outside the packet
service area.
start=1 : Inside the packet
service area.
start=4 : Unknown.
start=5 : Inside the packet
service area (while
roaming).
AT+CGREG=1
OK
AT+CGSN Display the serial number of the
FOMA terminal (15-digit
number).
ー
AT+CGSN
1234567890
12345
OK
AT+CLCK Lock applications (checking the
specifications).
(checking the specifications) (checking the
specifications)
AT+CLIP=n
[&F] [&W]
[?] [=?]
When a phone number with sub-
address is received, the call is
rejected.
(checking the specifications) AT+CLIP=0
OK
AT+CLIR=<n>
[?] [=?]
Set whether to send the Caller
ID when making 64K data
communication/video calls.
n=0 : In accord with the CLIR
service subscription.
n=1 : Do not send.
n=2 (default) : Send.
When “AT+CLIR?” is
executed appear in the
format of “+CLIR : <n>,<m>”.
m=0 : CLIR is not running.
(Always send).
m=1 : CLIR is running.
(Always hide).
m=2 : Unknown.
m=3 : CLIR temporary mode
(Default for hide).
m=4 : CLIR temporary mode
(Default for show).
AT+CLIR=0
OK
AT+CMEE=<n>
[&F] [&W]
[?] [=?]
Set the error report format of the
FOMA terminal.
n=0 (default) : Display
“ERROR”.
n=1 : Display in the format of
“+CMEE ERROR : xxxx”
(where xxxx are numbers).
n=2 : Display in the format of
“+CMEE ERROR : xxxx”
(where xxxx are text).
AT+CMEE=0
OK
AT Command Overview Parameters/Description Command Examples
AT Command List
Continued on the next page