User's Manual

44
Setting Up
AT+CNUM Display the own number of the
FOMA terminal.
Executing “AT+CNUM”
displays in the format of
“+CNUM : <number>,
<type>”
number : phone number
type=129 : Excluding the
international access code+
type=145 : Including the
international access code+
AT+CNUM
+CNUM;,+819
012345678”,
145
OK
AT+CPAS
[?] [=?]
Display FOMA terminal state. Executing “AT+CPAS?”
displays in the format of
“+CPAS : <n>”.
n=0 : Available to set AT
commands.
n=1 : Unavailable to set AT
commands.
n=2 : Unknown (Response
to AT commands is not
guaranteed).
n=3 : Available to set AT
commands even during
incoming.
n=4 : Available to set AT
commands even during a
call.
AT+CPAS?
+CPAS : 0
OK
AT+CPAS=?
+CPAS : (0,2,3,4)
OK
AT+CPIN=“pin”/
AT+CPIN=“puk”,
“pin”
[?]
Command to enter the PIN1
code or PUK code for UIM.
Enter the PIN1 code or PUK
code for “pin”.
Execute “AT+CPIN?” then
“+CPIN : <n>” is displayed.
n=READY : Authenticated.
n=SIM PIN : Waiting for
input.
n=SIM PUK : Waiting for
PUK code entry.
n=ERROR : Locked.
(+CPIN : SIM PIN
status)
AT+CPIN=“1234”
OK
(+CPIN : SIM PUK
status)
AT+CPIN=“12345678”,
“1234”
OK
AT+CPWD Change the UIM password.
(checking the specifications)
(checking the specifications) (checking the
specifications)
AT+CR=<n>
[&F] [&W]
[?] [=?]
Set whether to display the
bearer (communication type)
before “CONNECT” is displayed
when 64K data communication
or GSM dial up data
communication is connected.
n=0 (default) : Hide.
n=1 : Display in the format of
“+CR : <serv>”.
serv=GPRS : Packet
communication.
serv=SYNC : 64K data
communication.
serv=AV64K : Video calls.
AT+CR=1
OK
ATD＊99＊＊＊1#
+CR : GPRS
CONNECT
AT+CRC=<n>
[&F] [&W]
[?] [=?]
Set to use extend result code for
incoming connection.
n=0 (default) : Not to use
+CRING.
n=1 : Use +CRING, <type>
Executing “AT+CRC?”
displays in the format of
“+CRING : <type>”.
+CRING : GPRS“PPP”,,,
<APN> (When PPP packets
are sent or received)
AT+CRC=0
OK
AT Command Overview Parameters/Description Command Examples
AT Command List