User's Manual

7
Contents/Safety Instructions
General Precautions for the FOMA Terminal and UIM
DANGER
Do not disassemble or remodel
the terminal and UIM.
●
Fire, injury, electric shock or
malfunction may result.
Do not let FOMA terminal and
UIM get wet.
●
Contact with water or other
liquids may cause heating,
electric shock, fire or
malfunction. Take care not to use
the terminal and UIM in areas
where they could get wet.
Do not use or leave the FOMA
terminal and UIM in places with
a high temperature such as
near fire or heater, or places
exposed to direct sunlight or in
cars under the blazing sun.
●
Deformation, malfunction,
heating or the deterioration of
performance may result. Also,
part of the case could get
heated, causing bare skin burns.
WARNING
If odor, overheat, discoloration,
or deformation is detected
during use, immediately
remove the FOMA terminal
from card slot.
●
If use the FOMA terminal as they
are, overheat, burst or catching
fire may result.
Do not use near places such as
gas stations where there is
danger of fire or explosion.
●
If used in dusty places or where
there are flammable gases such
as propane or gasoline,
explosions or fire may result.
Do not throw the FOMA
terminal or UIM, or subject
them to severe shocks.
●
Malfunction or fire may result.
Be careful not to let electro
conductive materials (metal
pieces, pencil leads etc.)
contact with the connector
terminal. Also, make sure that
these are not entered into the
inside of the FOMA terminal.
●
Fire or other malfunctions may
result from a short circuit.
Do not put the FOMA terminal
or UIM in microwave ovens or
other heating appliances or
high pressure containers.
●
The FOMA terminal or UIM may
overheat, smoke or catch fire, or
its circuit parts may burst.
Do not disassemble
Avoid water
Safety Instructions