User's Manual

65
Utility Software
b
Perform the following steps
Display the Main screen when launching the utility
software
(Main screen operation settings)
yClick the check box
Display the Main screen always on top (Main screen
operation settings)
yClick the check box
Display the Main screen always on top when a call
arrives
(Main screen operation settings)
yClick the check box
Send Caller ID (Card settings)
yPull down menuySelect an option from the followings
Turn on/off the LED (Card settings)
yPull down menuyClick “ON” / “OFF”
• Setting to “OFF” disables the LED status indicator of the
FOMA terminal (P17).
Disconnect a voice call when shutting down the
PC/moving to standby mode
yClick the check box
c
Click [OK]/[適用 (Apply)]
Network Service Settings
Network Service Settings
You can configure necessary settings to use
DoCoMo’s network services. For descriptions
and instructions for using each service, refer to
“Network Services” (P71).
• Insert the FOMA terminal into the PC card slot before
performing these steps.
• While the Network Service Settings screen is displayed, no
operations can be performed from the Main screen. If a call
arrives during the operation, the call can be answered after
[閉じる (Close)] is clicked, however, the options being set
will be canceled.
Caller ID Notification
Setting the Caller ID Notification
Service
• When is displayed, operation is not possible.
a
Click (各種設定 (Settings)) on the
Main screen (P54)y“ネットワークサービ
ス設定 (Network Service Settings)”y“発
信者番号通知 (Caller ID Notification)” tab
•[設定確認 (Check Settings)] : The setting of “発信者番
号通知サービス設定 (Caller ID Notification Service
Setting)” can be checked.
b
Perform the following steps
Caller ID Notification Service Settings
yPull down menuySelect an option from the followingy
Click [設定送信 (Send Settings)]yEnter the network security
codeyClick [OK]
• Enter the network security code from the keyboard of the PC.
: The Main screen is displayed as an icon in the Task tray.
: The Main screen opens.
: Newly opened screens are displayed on the Main
screen.
: The Main screen opens at start-up.
: The Main screen does not open on top when a call
arrives.
: The Main screen opens on top when a call arrives.
通知 (Display)
: Caller ID is sent to the other party.
非通知 (Hide)
: Caller ID is not sent to the other party.
未設定 (Not set)
: According to the setting in “Setting Caller ID Notification
Service” (P65).
: Cancels shutting down/moving to the standby mode
without disconnecting a voice call.
: Disconnects the voice call and shuts down/moves to the
standby mode.
通知する (Display) : Caller ID is sent to the other party.
通知しない (Hide) : Caller ID is not sent to the other party.
Caller ID Notification Service Setting Screen
Network Service Settings