User's Manual

66
Utility Software
Voice Mail
Setting the Voice Mail Service
• When is displayed, operation is not possible.
• A separate subscription is required.
a
Click (各種設定 (Settings)) on the
Main screen (P54)y“ネットワークサービ
ス設定 (Network Service Settings)”y“留
守番電話 (Voice Mail)” tab
•[設定確認 (Check Settings)] : The settings of “留守番
電話サービス (Voice Mail Service)” and “留守番電話呼
び出し時間 (Voice Mail Paging Time (in seconds) [0 -
120])” can be checked.
b
Perform the following steps
Voice Mail Service
yPull down menuySelect an option from the followingsy
Click [設定送信 (Send Settings)]yClick [OK]
Voice Mail Ring Time (in seconds) [0 - 120] (Voice
Mail Service)
You can set the access time to connect to the Voice Mail Service
Center.
This can be skipped.
yPut a check in the box yEnter the ring time (in
seconds)yClick [設定送信 (Send Settings)]y[OK]
• You can also enter the ring time in seconds using the
keyboard of the PC.
• If “留守番電話呼び出し時間（秒） (Voice Mail Ring Time
(in seconds) [0 - 120])” is set to 0 (zero), a call is not
saved in Received Calls. (Checking the specifications)
Call Forwarding
Setting the Call Forwarding Service
• When is displayed, operation is not possible.
• A separate subscription is required.
• Save the forwarding phone number in Phonebook before
setting the service.
a
Click (各種設定 (Settings)) on the
Main screen (P54)y“ネットワークサービ
ス設定 (Network Service Settings)”y“転
送でんわ (Call Forwarding)” tab
•[設定確認 (Check Settings)] : The setting of “転送で
んわサービス設定 (Caller Forwarding Service Setting)”
can be checked.
b
Perform the following steps
Call Forwarding Service
yPull down menuySelect an option from the followingsy
Click [設定送信 (Send Settings)] (a)yClick [OK]
Call Forwarding Ring Time (in seconds) [0 - 120]
(Voice Mail Service)
You can set the ring time before a call is forwarded. This can be
skipped.
yPut a check in the box yEnter the ring time (in
seconds)yClick [設定送信 (Send Settings)] (a)y[OK]
Changing Forwarding Destination
Specify a forwarding phone number from Phonebook.
y[転送先選択 (Select Forwarding Destination)]ySelect a
forwarding destinationyClick [選択 (Select)]yClick [設定送
信 (Send Settings)] (b)y[OK]
開始 (Activate) : Voice Mail Service starts.
停止 (Deactivate) : Voice Mail Service stops.
Voice Mail Service Setting Screen
開始 (Activate) : Call Forwarding Service starts.
停止 (Deactivate) : Call Forwarding Service stops.
Call Forwarding Service Setting Screen
a
c
b
Network Service Settings