User's Manual

67
Utility Software
Connecting to Voice Mail when the Forwarding
Party is Busy
(Forwarding Party Busy Setting)
You can set whether to use Voice Mail when the Call Forwarding
Destination is busy.
yCheck boxyClick [設定送信 (Send Settings)] (c)y[OK]
• You can also enter the ring time in seconds using the
keyboard of the PC.
• You cannot specify a toll-free number or a 3-digit phone
number such as 110 as a forwarding destination.
• If a PBX, pager* or FAX is set as a forwarding
destination, a caller may get confused.
*: From January, 2001, the DoCoMo pager service
changed its name to QUICKCAST.
• If a forwarding destination has already been set, you can
skip the steps in “呼び出し時間（秒） [0 - 120] (Ring
Time (in seconds) [0 - 120])” and “転送先変更 (Change
Forwarding Destination)”.
• If “呼び出し時間（秒） [0 - 120] (Ring Time (in seconds)
[0 - 120])” is set to 0 (zero), a call is not saved in
Received Calls. (Checking the specifications)
• To use the option for “転送先通話中設定 (When the Call
Forwarding Destination is Busy)”, you need to subscribe
the “Voice Mail Service” and activate the service.
Caller ID Display Request Service
Setting the Caller ID Display Request
Service
• When is displayed, operation is not possible.
a
Click (各種設定 (Settings)) on the
Main screen (P54)y“ネットワークサービ
ス設定 (Network Service Settings)”y“番
号通知お願い (Caller ID Display
Request)” tab
•[設定確認 (Check Settings)] : The setting of “番号通知
お願いサービス (Caller ID Display Request Service)”
can be checked.
b
Perform the following steps
Caller ID Display Request Service
yPull down menuySelect an option from the followingy
Click [設定送信 (Send Settings)]yClick [OK]
Call Waiting
Setting the Call Waiting Service
• When is displayed, operation is not possible.
• A separate subscription is required.
a
Click (各種設定 (Settings)) on the
Main screen (P54)y“ネットワークサービ
ス設定 (Network Service Settings)”y“話
中着信 (Call Waiting)” tab
•[設定確認 (Check Settings)] : The setting of “Call
Waiting Service Setting” can be checked.
b
Perform the following steps
Call Waiting Service Settings
yPull down menu, select an option from the followingy
Click [設定送信 (Send Settings)]yClick [OK]
: A call is disconnected without using Voice Mail.
: Voice Mail is used.
Caller ID Display Request Service Settings
Screen
開始 (Activate) : Caller ID Display Request Service starts.
停止 (Deactivate) : Caller ID Display Request Service stops.
開始 (Activate) : Call Waiting Service starts.
停止 (Deactivate) : Call Waiting Service stops.
Call Waiting Service Settings Screen
Network Service Settings