User's Manual

50
Setting Up
* This command, which is a setting command, is not
stored in the nonvolatile memory written by [&W], and is
not reset by [&F] and [Z], either.
List of Reasons of Disconnection
(Checking the specification)
Result Codes
■ List of Result Code
■ Extended Result Codes
When &E0
Show the connection speed between the FOMA
terminal and the base.
When &E1
■ Communication Protocol Result Codes
■ Examples of Displayed Result Codes
When ATX0 is set
Regardless of the AT Commands (P46) settings,
only CONNECT is displayed after connection is
established.
Example of text display : ATD＊99＊＊＊1#
CONNECT
Example of numeric display : ATD＊99＊＊＊1#
1
When ATX1 is set
• When ATX1, AT￥V0 is set (default)
Display in the format of CONNECT <Speed
between FOMA and PC> after the connection
is established.
Example of text display
:ATD＊99＊＊＊1#
CONNECT 460800
Example of numeric display
:ATD＊99＊＊＊1#
121
• When ATX1, AT￥V1 is set
Display in the following format after the
connection is established.
CONNECT <Speed between FOMA and PC>
PACKET <Destination APN>/<Maximum uplink
speed (between FOMA terminal→Base)> /
<Maximum downlink speed (between FOMA
terminal←Base)>
Example of text display
:ATD＊99＊＊＊1#
CONNECT 46080 PACKET
mopera.ne.jp/64/384 (which means
connection is established with mopera.ne.
jp/64/384mopera.ne.jp/64/384.)
Example of numeric display
:ATD＊99＊＊＊1#
1215
* If ATX1 and AT￥V1 are set concurrently, a dial-up
connection may not be executed correctly. It is
recommended to use only AT￥V0.
No. Text display Description
0 OK Operation performed properly.
1 CONNECT Connected to the other party.
2 RING Incoming call.
3 NO CARRIER Line disconnected.
4 ERROR Unable to accept command.
6 NO DIAL TONE Unable to detect dial tone.
7
BUSY Detect busy tone. (Applied only
when dialing by circuit switching.)
8 NO ANSWER Completed connection timeout.
100 RESTRICTION Network use is restricted.
101
DELAYED Redial is delayed because of
restrictions.
Numeric
display
Text display Connection speed
121 CONNECT 32000 32000bps
122 CONNECT 64000 64000bps
125 CONNECT 384000 384000bps
133 CONNECT 3648000 3648000bps
Numeric
display
Text display Connection speed
5 CONNECT 1200 1200bps
10 CONNECT 2400 2400bps
11 CONNECT 4800 4800bps
13 CONNECT 7200 7200bps
12 CONNECT 9600 9600bps
15 CONNECT 14400 14400bps
16 CONNECT 19200 19200bps
17 CONNECT 38400 38400bps
18 CONNECT 57600 57600bps
19 CONNECT 115200 115200bps
20 CONNECT 230400 230400bps
21 CONNECT 460800 460800bps
Numeric
display
Text
display
Connection speed
1
PPPoverUD Connection with 64K data
communication
3
AV64K Connection with video call (64K)
communication
5
PACKET Connection with packet
communication
AT Command List